Introduction to Heating furnace denitration system in forging plant, SCR flue gas denitrification specifications, model parameters

Heating furnace denitration system in forging plantdelective catalytic reduction technology is an efficient flue gas denitrification technology.，it has the characteristics of Stable operation, Less secondary pollution, Mature technology, Efficient denitration and Environment friendly，it has the functions of Improve working conditions, Promote sustainable development, Improve energy efficiency, environmental protection and Improve working conditions。The following is to introduce the Heating furnace denitration system in forging plant:

1、Brief introduction of Heating furnace denitration system in forging plant

Heating furnace denitration system in forging plantthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，is a Heating furnace denitration system in forging plant。

Heating furnace denitration system in forging plant

2、Heating furnace denitration system in forging plant advantage

The advantages of Heating furnace denitration system in forging plant are as follows:

1. Intelligent control and convenience of operation

The Heating furnace denitration system in forging plant has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Heating furnace denitration system in forging plant can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. Mature and stable technology

Heating furnace denitration system in forging plant technology has been developed and applied for many years, and the technology is mature and stable. The Heating furnace denitration system in forging plant has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Heating furnace denitration system in forging plant technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Heating furnace denitration system in forging plant technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Heating furnace denitration system in forging plant technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. Environmental friendliness

The by-products produced by Heating furnace denitration system in forging plant technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Heating furnace denitration system in forging plant technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

5. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Heating furnace denitration system in forging plant technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

Heating furnace denitration system in forging plant

3、Heating furnace denitration system in forging plant structure composition

The Heating furnace denitration system in forging plant structure is introduced as follows:

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

3. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

4. Reactor

It is the core component of Heating furnace denitration system in forging plant technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

5. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

Heating furnace denitration system in forging plant

4、Heating furnace denitration system in forging plant use

Heating furnace denitration system in forging plantIt has a wide range of uses, including Meet the requirements of environmental protection, Flue gas denitrification, Promote sustainable development, Improve product quality and environmental protection，multifunctional, with functions such as environmental protection, Promote sustainable development, Improve energy efficiency, Improve working conditions and Promote sustainable development。

Heating furnace denitration system in forging plant

5、Advantages of Heating furnace denitration system in forging plant principle

Heating furnace denitration system in forging plantCatalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，it is widely used in coal-fired power station, iron and steel plant, Gas power plant, building materials, coal-fired power station and other industries，It has the functions of Flue gas denitrification, Promote sustainable development, environmental protection, Improve product quality and Meet the requirements of environmental protection。

Heating furnace denitration system in forging plant

6、Heating furnace denitration system in forging plant video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Heating furnace denitration system in forging plant production process and production site, and gain favorable comments and recognition from customers.。

Heating furnace denitration system in forging plant

As you can see from the live video.，One-combustion energy saving the principle is simple.Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.。

Heating furnace denitration system in forging plantis an efficient, stable and environment-friendly flue gas denitrification technology.，it can be used in building materials, cement plant, metallurgy, iron and steel plant, Gas power plant and other industries，features include Environmental protection and pollution-free, Promote sustainable development, Environment friendly, Economically feasible and Mature and stable technology。