Introduction to Regenerative walking heat treatment furnace, introduction to Forging furnace function advantages and characteristics

Regenerative walking heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is an advanced Regenerative walking heat treatment furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Regenerative walking heat treatment furnace

Regenerative walking heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Simple structure and advanced technology.，it mainly includes ventilation system, ventilation system, furnace chamber, combustor and convection chamber，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the product looks beautiful.，super quality and competitive price。

Regenerative walking heat treatment furnace

2、Regenerative walking heat treatment furnace application

Regenerative walking heat treatment furnaces have the following purposes.

1. Improve production efficiency

The Regenerative walking heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Regenerative walking heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Regenerative walking heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative walking heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Regenerative walking heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative walking heat treatment furnace

3、Structural advantages of Regenerative walking heat treatment furnace

The Regenerative walking heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative walking heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Regenerative walking heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative walking heat treatment furnace

4、Regenerative walking heat treatment furnace performance advantage

Regenerative walking heat treatment furnaces have the following advantages.

1. easy to operate

The operation interface of the Regenerative walking heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Regenerative walking heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Extend the service life of equipment

The Regenerative walking heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Uniform heating

The Regenerative walking heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Regenerative walking heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Regenerative walking heat treatment furnace

5、Regenerative walking heat treatment furnace function

Regenerative walking heat treatment furnacemultifunctional, with functions such as heat treatment, normalizing, quench, anneal and temper，features include Stable and reliable, Easy to maintain, energy saving and environmental protection, energy-efficient and Strong adaptability，is a common Regenerative walking heat treatment furnace，It can be used for Metal melting and casting, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment, Metal tempering, Metal tempering and so on，support customization。

Regenerative walking heat treatment furnace

6、Working principle of Regenerative walking heat treatment furnace

Regenerative walking heat treatment furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the functions of normalizing, hardening and tempering, Forging heating, Casting heating and heat treatment，It has the functions of Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency, Metal forging heating and Metal heat treatment，the product looks beautiful.，be loved by our customers.。

Regenerative walking heat treatment furnace

Regenerative walking heat treatment furnacethe product looks atmospheric.，it has the functions of hardening and tempering, heat treatment, anneal, quench and temper。