Introduction to Regenerative walking back and forth furnace and heating furnace structure principle

Regenerative walking back and forth furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Regenerative walking back and forth furnace

Regenerative walking back and forth furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a popular Regenerative walking back and forth furnace，is an advanced Regenerative walking back and forth furnace developed by our company in combination with the actual situation of the industry。

Regenerative walking back and forth furnace

2、Introduction of Regenerative walking back and forth furnace characteristics

Regenerative walking back and forth furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative walking back and forth furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Regenerative walking back and forth furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Stable and reliable

The Regenerative walking back and forth furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Efficient heating

The Regenerative walking back and forth furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Regenerative walking back and forth furnace

3、Regenerative walking back and forth furnace application

Regenerative walking back and forth furnaces have the following purposes.

1. Improve production efficiency

The Regenerative walking back and forth furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative walking back and forth furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Regenerative walking back and forth furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Regenerative walking back and forth furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative walking back and forth furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative walking back and forth furnace

4、Regenerative walking back and forth furnace principle

Regenerative walking back and forth furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Regenerative walking back and forth furnace

5、Regenerative walking back and forth furnace HD picture

Excellent materials, atmospheric design, fine workmanship, impeccable, trustworthy, all-round high-definition shooting, which is helpful for customers' reference.。

Regenerative walking back and forth furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、How much is the Regenerative walking back and forth furnace?

The Regenerative walking back and forth furnace price is introduced as follows:

1. Manufacturer's strength

The nature of the manufacturer can also greatly affect the price of the Regenerative walking back and forth furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

2. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

3. marketing channel

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. quality

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Regenerative walking back and forth furnace will vary greatly. One-combustion energy saving attaches great importance to the quality of products, and the formulation of prices is also reasonable.

Regenerative walking back and forth furnace

Regenerative walking back and forth furnaceis a common Regenerative walking back and forth furnace，It can be used for Energy conservation and environmental protection, Metal forging heating, Metal heat treatment, Metal melting and casting, Metal tempering, Improve production efficiency and so on，it has the characteristics of Easy to control, energy saving and environmental protection, energy-efficient, Strong adaptability and Stable and reliable。