Introduction to Denitrification of steel plant heating furnace, how much is the price of the SCR denitration system?

Denitrification of steel plant heating furnacethat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of steel plant heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of steel plant heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of steel plant heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of steel plant heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of steel plant heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of steel plant heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.。

1、Brief introduction of Denitrification of steel plant heating furnace

Denitrification of steel plant heating furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，super quality and competitive price。

Denitrification of steel plant heating furnace

2、Denitrification of steel plant heating furnace structure composition

The Denitrification of steel plant heating furnace has the following structure

1. control system

The whole Denitrification of steel plant heating furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

2. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

3. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

4. Reactor

It is the core component of Denitrification of steel plant heating furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

Denitrification of steel plant heating furnace

3、Denitrification of steel plant heating furnace application

Denitrification of steel plant heating furnaceIt can be used for Flue gas denitrification, environmental protection, Meet the requirements of environmental protection, Improve product quality, Promote sustainable development, Flue gas denitrification and so on，widely used incoal-fired power station,cement plant,Gas power plant,coal-fired power station,building materials and other industries，it is an ideal choice for customers to buy Denitrification of steel plant heating furnace。

Denitrification of steel plant heating furnace

4、Denitrification of steel plant heating furnace use

Denitrification of steel plant heating furnaceCommonly used inenvironmental protection,Improve product quality,Meet the requirements of environmental protection,Promote sustainable development,Flue gas denitrification and so on，is a Denitrification of steel plant heating furnace，the main features are energy saving and environmental protection, Efficient denitration, High denitration efficiency, Mature and stable technology and Good selectivity。

Denitrification of steel plant heating furnace

5、Denitrification of steel plant heating furnace structure

The Denitrification of steel plant heating furnace structure is introduced as follows:

1. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

2. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

3. control system

The whole Denitrification of steel plant heating furnace is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

4. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

5. Reactor

It is the core component of Denitrification of steel plant heating furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

Denitrification of steel plant heating furnace

6、How much is the Denitrification of steel plant heating furnace?

The Denitrification of steel plant heating furnace price is introduced as follows:

1. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Denitrification of steel plant heating furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Denitrification of steel plant heating furnace is reasonable for products with the same configuration.

2. Reasonable sales model

One-combustion energy saving Denitrification of steel plant heating furnace manufacturer is a specialized manufacturer of Denitrification of steel plant heating furnace, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Denitrification of steel plant heating furnace price is also low.

3. cost of production

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Denitrification of steel plant heating furnace will also be reduced.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Self quality

One-combustion energy saving attaches great importance to the quality of products, which can be reflected in the manufacturing process of Denitrification of steel plant heating furnace and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

Denitrification of steel plant heating furnace

Denitrification of steel plant heating furnacein the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，is a kind of high quality and low price Denitrification of steel plant heating furnace。