Introduction to Medium temperature trolley furnace in casting and forging plant and Forging furnace advantages and features

Medium temperature trolley furnace in casting and forging plantIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of Forging heating, hardening and tempering, quench, normalizing and heat treatment，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。The following is to introduce the Medium temperature trolley furnace in casting and forging plant:

1、Brief introduction of Medium temperature trolley furnace in casting and forging plant

Medium temperature trolley furnace in casting and forging plantIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，features include Easy to maintain, Strong adaptability, Stable and reliable, Easy to control and energy-efficient，is a popular Medium temperature trolley furnace in casting and forging plant。

Medium temperature trolley furnace in casting and forging plant

2、Medium temperature trolley furnace in casting and forging plant characteristics

The Medium temperature trolley furnace in casting and forging plant features are as follows:

1. Strong adaptability

The Medium temperature trolley furnace in casting and forging plant can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to control

The combustion system and ventilation system of the Medium temperature trolley furnace in casting and forging plant can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Efficient heating

The Medium temperature trolley furnace in casting and forging plant can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Medium temperature trolley furnace in casting and forging plant is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Medium temperature trolley furnace in casting and forging plants are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Medium temperature trolley furnace in casting and forging plant

3、Medium temperature trolley furnace in casting and forging plant video

Speak directly with facts on the spot。

Medium temperature trolley furnace in casting and forging plant

As you can see from the live video.，One-combustion energy saving It has a wide range of uses, including Metal tempering, Metal forging heating, Energy conservation and environmental protection, Improve production efficiency and Metal heat treatment。

4、Medium temperature trolley furnace in casting and forging plant use

The purpose of Medium temperature trolley furnace in casting and forging plant is introduced as follows:

1. Energy conservation and environmental protection

The Medium temperature trolley furnace in casting and forging plant uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Medium temperature trolley furnace in casting and forging plant can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Medium temperature trolley furnace in casting and forging plant can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Medium temperature trolley furnace in casting and forging plants can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Medium temperature trolley furnace in casting and forging plants can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Medium temperature trolley furnace in casting and forging plant

5、Medium temperature trolley furnace in casting and forging plant structure

The Medium temperature trolley furnace in casting and forging plant structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Medium temperature trolley furnace in casting and forging plant heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Medium temperature trolley furnace in casting and forging plant

6、Medium temperature trolley furnace in casting and forging plant principle

Medium temperature trolley furnace in casting and forging plantThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，usually used in building materials, petroleum, shipping, electron, material and other fields，the product looks beautiful.，It can be used for Metal melting and casting, Metal forging heating, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment, Metal tempering and so on，is designed by One-combustion energy saving with advanced technology。

Medium temperature trolley furnace in casting and forging plant

Medium temperature trolley furnace in casting and forging plantIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.，widely used in shipping, pharmacy, surface treatment, metallurgy, aerospace and other fields。