What is a Deep well insulation furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Deep well insulation furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，support customization。

1、Brief introduction of Deep well insulation furnace

Deep well insulation furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Deep well insulation furnace

2、Deep well insulation furnace HD picture

Details of One-combustion energy saving Deep well insulation furnace,the product looks atmospheric.。

Deep well insulation furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Deep well insulation furnace characteristics

Deep well insulation furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Deep well insulation furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to maintain

The structural design of the Deep well insulation furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Stable and reliable

The Deep well insulation furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Deep well insulation furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Deep well insulation furnace

4、Functional advantages of Deep well insulation furnace

Deep well insulation furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Deep well insulation furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Uniform heating

The Deep well insulation furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Extend the service life of equipment

The Deep well insulation furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Multiple fuel options

Although the Deep well insulation furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Wide application range

The Deep well insulation furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Deep well insulation furnace

5、Introduction of Deep well insulation furnace characteristics

Deep well insulation furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Deep well insulation furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to control

The combustion system and ventilation system of the Deep well insulation furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Deep well insulation furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Deep well insulation furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Deep well insulation furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Deep well insulation furnace

6、Deep well insulation furnace price concessions

The Deep well insulation furnace price is introduced as follows:

1. product model

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Deep well insulation furnace prices.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Deep well insulation furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Deep well insulation furnace price can meet the purchasing needs of customers.

4. Overall configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Deep well insulation furnace price is affected by the configuration, and the price varies.

5. sales mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

Deep well insulation furnace

Deep well insulation furnacethe product looks beautiful.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。