What is a Gas tube heating furnace? Introduction to the principle of heating furnace structure

Gas tube heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It can be used for Metal tempering, Metal melting and casting, Improve production efficiency, Metal forging heating, Improve production efficiency, Metal melting and casting and so on，is a popular Gas tube heating furnace，is a kind of Gas tube heating furnace manufactured by One-combustion energy saving。The following is to introduce the Gas tube heating furnace:

1、Brief introduction of Gas tube heating furnace

Gas tube heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，features include Stable and reliable, energy saving and environmental protection, energy-efficient, Strong adaptability and Easy to control，the product looks beautiful.，Commonly used inMetal heat treatment,Metal tempering,Energy conservation and environmental protection,Metal forging heating,Metal heat treatment and so on。

Gas tube heating furnace

2、Gas tube heating furnace introduction video

On-site aerial photography of Gas tube heating furnace。

Gas tube heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks beautiful.。

3、Gas tube heating furnace application

Gas tube heating furnaces have the following purposes.

1. Metal forging heating

The Gas tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Gas tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Gas tube heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Gas tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Gas tube heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Gas tube heating furnace

4、Gas tube heating furnace HD real shot

One-combustion energy saving Gas tube heating furnace manufacturers, a variety of series of Gas tube heating furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Gas tube heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Advantages of Gas tube heating furnace principle

Gas tube heating furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Widely used in Energy conservation and environmental protection, Metal tempering, Metal melting and casting, Improve production efficiency and Metal forging heating，Simple structure and advanced technology.，it is mainly composed of Radiation chamber, furnace chamber, ventilation system, combustor and convection chamber，is a common Gas tube heating furnace，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

Gas tube heating furnace

Gas tube heating furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as temper, quench, heat treatment, Casting heating and Forging heating，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。