Introduction to Tempering treatment of natural gas trolley furnace, heating furnace advantages, characteristics and principles

Tempering treatment of natural gas trolley furnaceIt is a forging heating device using gas as fuel.，features include Strong adaptability, Easy to maintain, energy saving and environmental protection, Strong adaptability and energy-efficient，widely used in pharmacy, building materials, shipping, Machinery manufacturing, pharmacy and other fields。The following is to introduce the Tempering treatment of natural gas trolley furnace:

1、Brief introduction of Tempering treatment of natural gas trolley furnace

Tempering treatment of natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Tempering treatment of natural gas trolley furnace

2、Tempering treatment of natural gas trolley furnace advantage

The advantages of Tempering treatment of natural gas trolley furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Intelligent control

The Tempering treatment of natural gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Wide application range

The Tempering treatment of natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Extend the service life of equipment

The Tempering treatment of natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Rapid temperature rise

The Tempering treatment of natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Tempering treatment of natural gas trolley furnace

3、Tempering treatment of natural gas trolley furnace characteristics

The Tempering treatment of natural gas trolley furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Tempering treatment of natural gas trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Tempering treatment of natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Tempering treatment of natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Tempering treatment of natural gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Efficient heating

The Tempering treatment of natural gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Tempering treatment of natural gas trolley furnace

4、Tempering treatment of natural gas trolley furnace structure

The Tempering treatment of natural gas trolley furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Tempering treatment of natural gas trolley furnace

5、Tempering treatment of natural gas trolley furnace use

The purpose of Tempering treatment of natural gas trolley furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Tempering treatment of natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Tempering treatment of natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Tempering treatment of natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Tempering treatment of natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Tempering treatment of natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Tempering treatment of natural gas trolley furnace

6、Tempering treatment of natural gas trolley furnace price advantage

The Tempering treatment of natural gas trolley furnace price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

2. Brand strength

At present, there are various brands of Tempering treatment of natural gas trolley furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Tempering treatment of natural gas trolley furnace are different.

3. Cost input

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

4. market competition

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Tempering treatment of natural gas trolley furnace will also conform to this market law.

5. Product configuration difference

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Tempering treatment of natural gas trolley furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Tempering treatment of natural gas trolley furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

Tempering treatment of natural gas trolley furnace

Tempering treatment of natural gas trolley furnacethe product looks atmospheric.，The overall structural design is relatively simple and compact.，generally, it is composed of convection chamber, ventilation system, furnace chamber, recovery of waste heat, convection chamber and other major components，it has the characteristics of Easy to control, Stable and reliable, Easy to maintain, Stable and reliable and Strong adaptability。