What is a Dual car industrial annealing furnace? Introduction to the advantages and characteristics of Forging furnace functions
Dual car industrial annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.,widely used in Household necessities, heat treatment, material, Machinery manufacturing, metallurgy and other fields,at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Dual car industrial annealing furnace:
1、Brief introduction of Dual car industrial annealing furnace
Dual car industrial annealing furnaceIt is a forging heating device using gas as fuel.。
Dual car industrial annealing furnace
2、Dual car industrial annealing furnace use
The purpose of Dual car industrial annealing furnace is introduced as follows:
- Energy conservation and environmental protection
- Improve production efficiency
- Metal forging heating
- Metal melting and casting
- Metal tempering
The Dual car industrial annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.
The Dual car industrial annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.
The Dual car industrial annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.
Although it is mainly used for forging heating, some types of Dual car industrial annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.
By properly heating and cooling the metal material, the Dual car industrial annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.
Dual car industrial annealing furnace
3、Dual car industrial annealing furnace principle
Dual car industrial annealing furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.,It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。
Dual car industrial annealing furnace
4、Dual car industrial annealing furnace function
Dual car industrial annealing furnaceit has the functions of heat treatment, normalizing, temper, Forging heating and anneal,It is a forging heating device using gas as fuel.,The structural design is more advanced and reasonable.,the main structure includes Radiation chamber, combustor, recovery of waste heat, ventilation system, convection chamber and so on,usually used in building materials, pharmacy, light industry, machinery, petroleum and other fields,it is mainly composed of ventilation system, furnace chamber, Radiation chamber, recovery of waste heat and ventilation system。
Dual car industrial annealing furnace
5、Structural advantages of Dual car industrial annealing furnace
The Dual car industrial annealing furnace structure is introduced as follows:
- furnace chamber
- Radiation chamber
- Waste heat recovery system
- convection chamber
- combustor
A space for holding metallic materials for heating.
The heat load of the main place for Dual car industrial annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.
Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.
The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.
The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.
Dual car industrial annealing furnace
6、How much is the Dual car industrial annealing furnace?
The Dual car industrial annealing furnace price is introduced as follows:
- brand
- Cost input
- product function
- regional difference
- technology content
Different brands of products in the same series have more or less differences in product prices, and different brands of Dual car industrial annealing furnace have more or less differences in price.
The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Dual car industrial annealing furnace will also be reduced.
The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.
One-combustion energy savingJinan, Shandong province, the transportation is convenient, and the corresponding cost of transporting Dual car industrial annealing furnace is low, which reduces the cost of selling Dual car industrial annealing furnace by manufacturers, and the price will also decrease.
The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.
Dual car industrial annealing furnace
Dual car industrial annealing furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.,the product looks beautiful.,features include Easy to maintain, Strong adaptability, energy-efficient, Stable and reliable and Stable and reliable。
Related recommendation
-
What is a Regenerative gas walking industrial furnace? Introduction to the advantages and characteristics of Forging furnace functions
2025-5-27 -
Introduction to Roller type continuous heat treatment furnace, forging furnace advantages, characteristics and principles
2025-5-27 -
What is a Side door trolley furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace
2025-5-27 -
What is a Full fiber forging heating furnace? Introduction to the advantages and characteristics of Forging furnace functions
2025-5-27 -
Introduction to Environmentally friendly forging heating furnace, introduction to forging furnace advantages and characteristics
2025-5-27 -
What is a roller hearth type heating furnace? Introduction to the principle of heating furnace structure
2025-5-27 -
Introduction to Heat treatment equipment trolley heating furnace and heating furnace structure principle
2025-5-27 -
台车式模具加热炉
2023-07-15 -
What is a Double chamber quenching industrial furnace? Introduction to the advantages and characteristics of Forging furnace functions
2025-5-27 -
What is a Kiln car trolley forging heating furnace? Introduction to the advantages and characteristics of Forging furnace functions
2025-5-27