What is a Double chamber quenching industrial furnace? Introduction to the advantages and characteristics of Forging furnace functions

Double chamber quenching industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the characteristics of energy-efficient, energy-efficient, Stable and reliable, energy saving and environmental protection and Easy to maintain。The following is to introduce the Double chamber quenching industrial furnace:

1、Brief introduction of Double chamber quenching industrial furnace

Double chamber quenching industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of anneal, quench, normalizing, temper and hardening and tempering，it is mainly composed of Radiation chamber, ventilation system, Radiation chamber, combustor and recovery of waste heat。

Double chamber quenching industrial furnace

2、Double chamber quenching industrial furnace performance advantage

Double chamber quenching industrial furnaces have the following advantages.

1. Wide application range

The Double chamber quenching industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Intelligent control

The Double chamber quenching industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Improve product quality

Because the Double chamber quenching industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Extend the service life of equipment

The Double chamber quenching industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Rapid temperature rise

The Double chamber quenching industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Double chamber quenching industrial furnace

3、Double chamber quenching industrial furnace principle

Double chamber quenching industrial furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is a product series that integrates Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting, Metal tempering and Metal heat treatment，modern technology，low in price。

Double chamber quenching industrial furnace

4、Structural advantages of Double chamber quenching industrial furnace

The Double chamber quenching industrial furnace has the following structure

1. Radiation chamber

The heat load of the main place for Double chamber quenching industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Double chamber quenching industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Double chamber quenching industrial furnace

5、Introduction of Double chamber quenching industrial furnace characteristics

Double chamber quenching industrial furnace has the following characteristics

1. Easy to maintain

The structural design of the Double chamber quenching industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Double chamber quenching industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Double chamber quenching industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Double chamber quenching industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Double chamber quenching industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Double chamber quenching industrial furnace

6、Double chamber quenching industrial furnace work site real shot

One-combustion energy saving Double chamber quenching industrial furnacethe product looks beautiful., the following is a panoramic shot of the Double chamber quenching industrial furnace for your reference.。

Double chamber quenching industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Double chamber quenching industrial furnacethe advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a Double chamber quenching industrial furnace，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。