Introduction to Dual car high-temperature calcination furnace, Forging furnace advantages, characteristics and principles

Dual car high-temperature calcination furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The price is more affordable。The following is to introduce the Dual car high-temperature calcination furnace:

1、Brief introduction of Dual car high-temperature calcination furnace

Dual car high-temperature calcination furnaceIt is a forging heating device using gas as fuel.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it is widely used inwar industry,aerospace,war industry,automobile,electron and other industries，is a Dual car high-temperature calcination furnace，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Dual car high-temperature calcination furnace

2、Dual car high-temperature calcination furnace HD real shot

The following is the live video of Dual car high-temperature calcination furnace designed and produced by One-combustion energy saving for users, from which we can see the The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment. of Dual car high-temperature calcination furnace.。

Dual car high-temperature calcination furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

3、Introduction of advantages of Dual car high-temperature calcination furnace

The advantages of Dual car high-temperature calcination furnace are as follows:

1. Improve product quality

Because the Dual car high-temperature calcination furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. easy to operate

The operation interface of the Dual car high-temperature calcination furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Efficient combustion

The Dual car high-temperature calcination furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Wide application range

The Dual car high-temperature calcination furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Multiple fuel options

Although the Dual car high-temperature calcination furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Dual car high-temperature calcination furnace

4、Dual car high-temperature calcination furnace characteristics

The Dual car high-temperature calcination furnace features are as follows:

1. Efficient heating

The Dual car high-temperature calcination furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Dual car high-temperature calcination furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Dual car high-temperature calcination furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Stable and reliable

The Dual car high-temperature calcination furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Dual car high-temperature calcination furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Dual car high-temperature calcination furnace

5、Dual car high-temperature calcination furnace price consultation

The Dual car high-temperature calcination furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Dual car high-temperature calcination furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Dual car high-temperature calcination furnace price can meet the purchasing needs of customers.

2. Company size

There are many manufacturers of products in Jinan, Shandong province, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Dual car high-temperature calcination furnace is naturally different.

3. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. market demand

With the increasingly fierce competition of Dual car high-temperature calcination furnace, market factors have a certain influence on the price of Dual car high-temperature calcination furnace. When the demand in the market increases and the supply remains unchanged, the price will rise. On the contrary, the price will fall. When there is an increase in supply and the demand remains unchanged, the price will rise, on the contrary, the price will fall.

5. Product configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Dual car high-temperature calcination furnace price is affected by the configuration, and the price varies.

Dual car high-temperature calcination furnace

6、How to choose the right product manufacturer?

Choosing a suitable Dual car high-temperature calcination furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Dual car high-temperature calcination furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Dual car high-temperature calcination furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a popular Dual car high-temperature calcination furnace，it has the functions of heat treatment, anneal, hardening and tempering, normalizing and quench。