What is a Regenerative chamber heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Regenerative chamber heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It can be used for Improve production efficiency, Metal heat treatment, Metal melting and casting, Improve production efficiency, Metal tempering, Energy conservation and environmental protection and so on，features include Strong adaptability, Stable and reliable, Easy to control, Easy to maintain and energy saving and environmental protection，widely used inHousehold necessities,surface treatment,metallurgy,war industry,building materials and other industries，can be customized according to user's needs.。The following is to introduce the Regenerative chamber heating furnace:

1、Brief introduction of Regenerative chamber heating furnace

Regenerative chamber heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，customizable。

Regenerative chamber heating furnace

2、Regenerative chamber heating furnace performance advantage

Regenerative chamber heating furnaces have the following advantages.

1. Extend the service life of equipment

The Regenerative chamber heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative chamber heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Extend the service life of equipment

The Regenerative chamber heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. easy to operate

The operation interface of the Regenerative chamber heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Regenerative chamber heating furnace

3、Regenerative chamber heating furnace use

The purpose of Regenerative chamber heating furnace is introduced as follows:

1. Metal forging heating

The Regenerative chamber heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative chamber heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Regenerative chamber heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Regenerative chamber heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Energy conservation and environmental protection

The Regenerative chamber heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative chamber heating furnace

4、Regenerative chamber heating furnace characteristics

The Regenerative chamber heating furnace features are as follows:

1. Efficient heating

The Regenerative chamber heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The Regenerative chamber heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

The combustion system and ventilation system of the Regenerative chamber heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Regenerative chamber heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Regenerative chamber heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Regenerative chamber heating furnace

5、Advantages of Regenerative chamber heating furnace principle

Regenerative chamber heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，reliable quality，The price is low and affordable。

Regenerative chamber heating furnace

6、How much is the Regenerative chamber heating furnace?

The Regenerative chamber heating furnace price is introduced as follows:

1. cost of production

Product manufacturers are different, and the cost spent by each manufacturer in producing products is definitely different. The higher the cost of producing products, the higher the price of products set by manufacturers. On the contrary, the Regenerative chamber heating furnace price is low.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Regenerative chamber heating furnace have more or less differences in price.

3. Proper management mode

One-combustion energy saving Regenerative chamber heating furnace manufacturer is a large Regenerative chamber heating furnace manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Regenerative chamber heating furnace price is also low.

4. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Regenerative chamber heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Regenerative chamber heating furnace price can meet the purchasing needs of customers.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Regenerative chamber heating furnace

Regenerative chamber heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main structure includes convection chamber, combustor, ventilation system, Radiation chamber, ventilation system and so on，it has the functions of anneal, Casting heating, normalizing, heat treatment and hardening and tempering。