What is a Rotary quenching furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Rotary quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a Rotary quenching furnace newly developed by One-combustion energy saving。The following is to introduce the Rotary quenching furnace:

1、Brief introduction of Rotary quenching furnace

Rotary quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Simple structure and reliable operation.，the main structure includes convection chamber, combustor, Radiation chamber, ventilation system, ventilation system and so on。

Rotary quenching furnace

2、Rotary quenching furnace characteristics

The Rotary quenching furnace features are as follows:

1. Easy to maintain

The structural design of the Rotary quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Rotary quenching furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Rotary quenching furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Rotary quenching furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to control

The combustion system and ventilation system of the Rotary quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Rotary quenching furnace

3、Rotary quenching furnace picture

A high-definition picture list of Rotary quenching furnace is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Jinan, Shandong province, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Rotary quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Rotary quenching furnace use

The purpose of Rotary quenching furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Rotary quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Rotary quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Rotary quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Rotary quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Rotary quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Rotary quenching furnace

5、Working principle of Rotary quenching furnace

Rotary quenching furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it mainly includes recovery of waste heat, furnace chamber, furnace chamber, ventilation system and combustor，Rotary quenching furnaceSimple structure and advanced technology.，Widely used inMetal tempering,Metal melting and casting,Improve production efficiency,Energy conservation and environmental protection,Metal forging heating and so on，It is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.。

Rotary quenching furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a strong and professional Rotary quenching furnace manufacturer, with advanced Rotary quenching furnace production technology and rich production experience. It will not only provide users with Rotary quenching furnace with Stable and reliable, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Rotary quenching furnaceIt is a product series that integrates Metal heat treatment, Metal melting and casting, Improve production efficiency, Metal forging heating and Metal heat treatment，it has the functions of normalizing, Casting heating, heat treatment, Forging heating and temper，It is a forging heating device using gas as fuel.。