Introduction to Isothermal normalizing industrial furnace, heating furnace specifications, model parameters

Isothermal normalizing industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of energy saving and environmental protection, energy saving and environmental protection, Easy to maintain, Stable and reliable and Easy to control，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。The following is to introduce the Isothermal normalizing industrial furnace:

1、Brief introduction of Isothermal normalizing industrial furnace

Isothermal normalizing industrial furnaceIt is a forging heating device using gas as fuel.，The structural design is more advanced and reasonable.，it is mainly composed of combustor, convection chamber, ventilation system, recovery of waste heat and ventilation system，It can be used for Metal forging heating, Improve production efficiency, Metal melting and casting, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and so on，the product looks atmospheric.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Isothermal normalizing industrial furnace

2、Isothermal normalizing industrial furnace working site

Speak directly with facts on the spot。

Isothermal normalizing industrial furnace

As you can see from the live video.，One-combustion energy saving the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

3、Isothermal normalizing industrial furnace characteristics

The Isothermal normalizing industrial furnace features are as follows:

1. Strong adaptability

The Isothermal normalizing industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Stable and reliable

The Isothermal normalizing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The Isothermal normalizing industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Isothermal normalizing industrial furnace

4、Structural advantages of Isothermal normalizing industrial furnace

The Isothermal normalizing industrial furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Isothermal normalizing industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Isothermal normalizing industrial furnace

5、Isothermal normalizing industrial furnace use

The purpose of Isothermal normalizing industrial furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Isothermal normalizing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Isothermal normalizing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Isothermal normalizing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Isothermal normalizing industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Isothermal normalizing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Isothermal normalizing industrial furnace

Isothermal normalizing industrial furnaceit is widely used in building materials, light industry, Household necessities, pharmacy, electron and other industries，It has a wide range of uses, and is often used inImprove production efficiency,Energy conservation and environmental protection,Metal heat treatment,Metal melting and casting,Metal tempering and so on，it has the functions of Casting heating, normalizing, temper, quench and hardening and tempering。