Introduction to Regenerative natural gas chain heat treatment furnace, heating furnace advantages, characteristics and principles

Regenerative natural gas chain heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is an ideal choice for customers to buy Regenerative natural gas chain heat treatment furnace。The following is to introduce the Regenerative natural gas chain heat treatment furnace:

1、Brief introduction of Regenerative natural gas chain heat treatment furnace

Regenerative natural gas chain heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main structure includes convection chamber, Radiation chamber, combustor, furnace chamber, recovery of waste heat and so on，productThe structural design is more advanced and reasonable.，it has been widely used in automobile, building materials, surface treatment, light industry, electron and other industries。

Regenerative natural gas chain heat treatment furnace

2、Regenerative natural gas chain heat treatment furnace use

The purpose of Regenerative natural gas chain heat treatment furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative natural gas chain heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Regenerative natural gas chain heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Regenerative natural gas chain heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Regenerative natural gas chain heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Energy conservation and environmental protection

The Regenerative natural gas chain heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative natural gas chain heat treatment furnace

3、Advantages of Regenerative natural gas chain heat treatment furnace principle

Regenerative natural gas chain heat treatment furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Regenerative natural gas chain heat treatment furnace

4、Regenerative natural gas chain heat treatment furnace function

Regenerative natural gas chain heat treatment furnaceit has the functions of hardening and tempering, normalizing, anneal, Casting heating and Forging heating，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it can be used in petroleum, heat treatment, war industry, Machinery manufacturing, pharmacy and other industries，the product looks beautiful.，is carefully developed by One-combustion energy saving combined with advanced technology。

Regenerative natural gas chain heat treatment furnace

5、Video analysis of Regenerative natural gas chain heat treatment furnace

The following is the live video of Regenerative natural gas chain heat treatment furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability. of One-combustion energy savingRegenerative natural gas chain heat treatment furnace.。

Regenerative natural gas chain heat treatment furnace

As you can see from the live video.，One-combustion energy saving at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

6、Regenerative natural gas chain heat treatment furnace price concessions

The Regenerative natural gas chain heat treatment furnace price is introduced as follows:

1. Manufacturer's sales model

One-combustion energy saving Regenerative natural gas chain heat treatment furnace manufacturer is a self-produced and self-selling manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Regenerative natural gas chain heat treatment furnace price is also low.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. Reasonable cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Regenerative natural gas chain heat treatment furnace.

5. market factors

The Regenerative natural gas chain heat treatment furnace market is always a fluctuating variable value. When the demand for this product in the market is far greater than the supply, the product price will be higher. On the other hand, when the market demand is much less than the supply, manufacturers are eager to sell their products and lower their prices appropriately.

Regenerative natural gas chain heat treatment furnace

Regenerative natural gas chain heat treatment furnaceIt can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，Simple structure and reliable operation.，the main structure includes convection chamber, ventilation system, ventilation system, recovery of waste heat and ventilation system，multifunctional, with functions such as temper, heat treatment, Casting heating, normalizing and heat treatment。