Introduction to Flame retardant heating furnace, advantages, characteristics and principles of Forging furnace

Flame retardant heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Flame retardant heating furnace:

1、Brief introduction of Flame retardant heating furnace

Flame retardant heating furnaceIt is a forging heating device using gas as fuel.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has the functions of Forging heating, quench, Casting heating, normalizing and anneal，Widely used inMetal forging heating,Metal heat treatment,Metal melting and casting,Metal forging heating,Improve production efficiency and so on，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Flame retardant heating furnace

2、Advantages of Flame retardant heating furnace principle

Flame retardant heating furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，modern technology，low in price。

Flame retardant heating furnace

3、Flame retardant heating furnace function

Flame retardant heating furnacemultifunctional, with functions such as hardening and tempering, Forging heating, quench, temper and heat treatment，is a popular Flame retardant heating furnace，is based on One-combustion energy saving is an advanced Flame retardant heating furnace developed by our company in combination with the actual situation of the industry。

Flame retardant heating furnace

4、Introduction of Flame retardant heating furnace characteristics

Flame retardant heating furnace has the following characteristics

1. Stable and reliable

The Flame retardant heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Flame retardant heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to control

The combustion system and ventilation system of the Flame retardant heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Flame retardant heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to maintain

The structural design of the Flame retardant heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Flame retardant heating furnace

5、Flame retardant heating furnace performance advantage

The advantages of Flame retardant heating furnace are as follows:

1. Multiple fuel options

Although the Flame retardant heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Flame retardant heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Extend the service life of equipment

The Flame retardant heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Rapid temperature rise

The Flame retardant heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Flame retardant heating furnace

6、Flame retardant heating furnace price concessions

The Flame retardant heating furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Flame retardant heating furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Flame retardant heating furnace are different.

2. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. raw material

The quality of material selection is one of the main factors that directly affect the Flame retardant heating furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. market factors

The market demand has a certain impact on the price of Flame retardant heating furnace. When there are many customers who need Flame retardant heating furnace in the market, there will be a phenomenon that demand exceeds supply, and then the price of Flame retardant heating furnace will become higher. On the contrary, when there are very few customers who need Flame retardant heating furnace, there will be a phenomenon of oversupply, and the price of Flame retardant heating furnace will be reduced.

5. product costs

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

Flame retardant heating furnace

Flame retardant heating furnaceit is mainly composed of recovery of waste heat, combustor, ventilation system, furnace chamber and Radiation chamber，it has the functions of Casting heating, anneal, normalizing, hardening and tempering and anneal，It is a product series that integrates Metal tempering, Energy conservation and environmental protection, Metal forging heating, Metal melting and casting and Metal heat treatment。