Introduction to Circular steel rolling heating furnace and Forging furnace advantages and features

Circular steel rolling heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of normalizing, heat treatment, temper, quench and Casting heating，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。The following is to introduce the Circular steel rolling heating furnace:

1、Brief introduction of Circular steel rolling heating furnace

Circular steel rolling heating furnaceIt is a forging heating device using gas as fuel.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，widely used inchemical industry,shipping,heat treatment,Household necessities,automobile and other industries，the product looks beautiful.，it is an ideal choice for customers to buy Circular steel rolling heating furnace。

Circular steel rolling heating furnace

2、Circular steel rolling heating furnace function

Circular steel rolling heating furnaceit has the functions of Casting heating, quench, anneal, normalizing and heat treatment，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，support customization。

Circular steel rolling heating furnace

3、Working principle of Circular steel rolling heating furnace

Circular steel rolling heating furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，generally, it is composed of convection chamber, Radiation chamber, combustor, furnace chamber, recovery of waste heat and other major components，It has a wide range of uses, and is often used inMetal heat treatment,Metal melting and casting,Metal tempering,Metal forging heating,Energy conservation and environmental protection and so on，energy saving and environmental protection,Strong adaptability,Easy to maintain,Easy to control,energy-efficient，is a Circular steel rolling heating furnace newly developed by One-combustion energy saving。

Circular steel rolling heating furnace

4、Circular steel rolling heating furnace application

The purpose of Circular steel rolling heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Circular steel rolling heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Circular steel rolling heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Circular steel rolling heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Circular steel rolling heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Circular steel rolling heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Circular steel rolling heating furnace

5、Circular steel rolling heating furnace characteristics

The Circular steel rolling heating furnace features are as follows:

1. Strong adaptability

The Circular steel rolling heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Efficient heating

The Circular steel rolling heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Circular steel rolling heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Circular steel rolling heating furnace

6、Circular steel rolling heating furnace price

The Circular steel rolling heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

3. Reasonable cost

One-combustion energy saving has a large production scale, strong manufacturing strength and high degree of automation in product production. In such a manufacturing environment, the cost of manufacturing Circular steel rolling heating furnace in One-combustion energy saving is greatly reduced.

4. Reasonable sales model

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

5. quality

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. One-combustion energy saving has strictly controlled the quality and the sales price is also reasonable.

Circular steel rolling heating furnace

Circular steel rolling heating furnaceis a common Circular steel rolling heating furnace，the product looks atmospheric.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。