What is a Rotary heating furnace? How much is the price of the Forging furnace?

Rotary heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Cheap and high quality。The following is to introduce the Rotary heating furnace:

1、Brief introduction of Rotary heating furnace

Rotary heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Rotary heating furnace，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，be of high quality，The price is more affordable。

Rotary heating furnace

2、Rotary heating furnace display

Rotary heating furnace high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Rotary heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of advantages of Rotary heating furnace

The advantages of Rotary heating furnace are as follows:

1. Intelligent control

The Rotary heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Multiple fuel options

Although the Rotary heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Rotary heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Uniform heating

The Rotary heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Rotary heating furnace

4、Structural characteristics of Rotary heating furnace

The Rotary heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Rotary heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Rotary heating furnace

5、Working principle of Rotary heating furnace

Rotary heating furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the main features are Strong adaptability, energy saving and environmental protection, Easy to control, Easy to maintain and Stable and reliable，It has the functions of Metal forging heating, Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting and Metal tempering，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。

Rotary heating furnace

6、Rotary heating furnace performance advantage

Rotary heating furnaces have the following advantages.

1. Extend the service life of equipment

The Rotary heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Rotary heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Improve product quality

Because the Rotary heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Rapid temperature rise

The Rotary heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. easy to operate

The operation interface of the Rotary heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Rotary heating furnace

Rotary heating furnaceit has been widely used in machinery, aerospace, pharmacy, war industry, building materials and other industries，the product looks beautiful.，It can be used for Metal forging heating, Improve production efficiency, Metal tempering, Metal melting and casting, Metal heat treatment, Metal heat treatment and so on。