Introduction to Environmentally friendly forging furnace, advantages, characteristics and principles of Forging furnace

Environmentally friendly forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，is a popular Environmentally friendly forging furnace。The following is to introduce the Environmentally friendly forging furnace:

1、Brief introduction of Environmentally friendly forging furnace

Environmentally friendly forging furnaceIt is a forging heating device using gas as fuel.，It is mostly used in Improve production efficiency, Metal tempering, Metal melting and casting, Metal forging heating, Improve production efficiency, Metal heat treatment and so on。

Environmentally friendly forging furnace

2、Advantages of Environmentally friendly forging furnace principle

Environmentally friendly forging furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Environmentally friendly forging furnace

3、Introduction of Environmentally friendly forging furnace characteristics

Environmentally friendly forging furnace has the following characteristics

1. Stable and reliable

The Environmentally friendly forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Environmentally friendly forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Efficient heating

The Environmentally friendly forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Environmentally friendly forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Environmentally friendly forging furnace

4、Structural characteristics of Environmentally friendly forging furnace

The Environmentally friendly forging furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Environmentally friendly forging furnace

5、Environmentally friendly forging furnace real beat

Take a look at the high-definition drawings of Environmentally friendly forging furnace with excellent quality for our customers' reference.。

Environmentally friendly forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Environmentally friendly forging furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a common Environmentally friendly forging furnace，the main features are Strong adaptability, Stable and reliable, energy-efficient, energy saving and environmental protection and Strong adaptability。