Introduction of Bright quenching furnace

Bright quenching furnaceIt is a forging heating device using gas as fuel.，is a popular Bright quenching furnace。

1、Brief introduction of Bright quenching furnace

Bright quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Structure consists of ventilation system, furnace chamber, Radiation chamber, convection chamber, combustor and so on，productThe overall structural design is simple and novel.，is a common Bright quenching furnace，be loved by our customers.。

Bright quenching furnace

2、Bright quenching furnace application

Bright quenching furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Bright quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Bright quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Bright quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Bright quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Bright quenching furnace

3、Introduction of advantages of Bright quenching furnace

The advantages of Bright quenching furnace are as follows:

1. Rapid temperature rise

The Bright quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Bright quenching furnace can significantly reduce energy consumption, thus reducing operating costs.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. easy to operate

The operation interface of the Bright quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Efficient combustion

The Bright quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Bright quenching furnace

4、Bright quenching furnace work site real shot

One-combustion energy saving Bright quenching furnace manufacturers, a variety of series of Bright quenching furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Bright quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Bright quenching furnace function

Bright quenching furnaceit has the functions of anneal, hardening and tempering, Casting heating, quench and normalizing，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a Bright quenching furnace newly developed by One-combustion energy saving。

Bright quenching furnace

Bright quenching furnacethe advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as heat treatment, temper, quench, anneal and Forging heating。