What is a Industrial quenching furnace denitrification? Introduction to the advantages, characteristics, and principles of the SCR denitration system

Industrial quenching furnace denitrificationis an efficient, stable and environment-friendly flue gas denitrification technology.，The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Industrial quenching furnace denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Industrial quenching furnace denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Industrial quenching furnace denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Industrial quenching furnace denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Industrial quenching furnace denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Industrial quenching furnace denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Industrial quenching furnace denitrification technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，is a kind of high quality and low price Industrial quenching furnace denitrification，The overall structural design is relatively simple and compact.，it is mainly composed of Catalyst supply system, Temperature control and monitoring system, control system, Flue gas mixing and distribution system and Catalyst reactor，is a kind of Industrial quenching furnace denitrification manufactured by One-combustion energy saving。The following is to introduce the Industrial quenching furnace denitrification:

1、Brief introduction of Industrial quenching furnace denitrification

Industrial quenching furnace denitrificationthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the main features are Environmental protection and pollution-free, Mature technology, Strong adaptability, Economically feasible and Good selectivity，can be customized according to user's needs.。

Industrial quenching furnace denitrification

2、Industrial quenching furnace denitrification principle

Industrial quenching furnace denitrificationat the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，is a popular Industrial quenching furnace denitrification，it is an ideal choice for customers to buy Industrial quenching furnace denitrification。

Industrial quenching furnace denitrification

3、Industrial quenching furnace denitrification use

Industrial quenching furnace denitrificationCommonly used inenvironmental protection,Improve product quality,Meet the requirements of environmental protection,Promote sustainable development,environmental protection and so on，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Industrial quenching furnace denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Industrial quenching furnace denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Industrial quenching furnace denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Industrial quenching furnace denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Industrial quenching furnace denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Industrial quenching furnace denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.。

Industrial quenching furnace denitrification

4、Industrial quenching furnace denitrification function

Industrial quenching furnace denitrificationmultifunctional, with functions such as environmental protection, Improve energy efficiency, environmental protection, Improve working conditions and Promote sustainable development，it refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.。

Industrial quenching furnace denitrification

5、How much is the Industrial quenching furnace denitrification?

The Industrial quenching furnace denitrification price is introduced as follows:

1. Quality advantages and disadvantages

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

2. regional advantages

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

3. Model specification

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. manufacturing cost

The cost of manufacturing Industrial quenching furnace denitrification varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

Industrial quenching furnace denitrification

6、One-combustion energy saving's strength

The company has many years of Industrial quenching furnace denitrification manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Industrial quenching furnace denitrificationis a kind of high quality and low price Industrial quenching furnace denitrification，it has been widely used in Gas power plant, coal-fired power station, iron and steel plant, metallurgy, building materials and other industries，It has a wide range of uses, including Improve product quality, Flue gas denitrification, Promote sustainable development, Improve product quality and Meet the requirements of environmental protection。