Introduction to High temperature deep well furnace and heating furnace advantages and features

High temperature deep well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the main structure includes ventilation system, convection chamber, Radiation chamber, ventilation system and Radiation chamber，This productThe overall structural design is simple and novel.，it has the functions of Casting heating, quench, normalizing, anneal and temper，It has the functions of Metal melting and casting, Metal tempering, Improve production efficiency, Energy conservation and environmental protection and Metal melting and casting，customizable。The following is to introduce the High temperature deep well furnace:

1、Brief introduction of High temperature deep well furnace

High temperature deep well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the product looks beautiful.。

High temperature deep well furnace

2、High temperature deep well furnace characteristics

The High temperature deep well furnace features are as follows:

1. Stable and reliable

The High temperature deep well furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The High temperature deep well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The High temperature deep well furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the High temperature deep well furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

High temperature deep well furnace

3、High temperature deep well furnace video detail

The following is the live video of High temperature deep well furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. of One-combustion energy savingproduce的High temperature deep well furnace.。

High temperature deep well furnace

As you can see from the live video.，One-combustion energy saving it has the characteristics of energy-efficient, Easy to maintain, Stable and reliable, Easy to control and Easy to control。

4、High temperature deep well furnace use

The purpose of High temperature deep well furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the High temperature deep well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, High temperature deep well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The High temperature deep well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The High temperature deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The High temperature deep well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

High temperature deep well furnace

5、High temperature deep well furnace function

High temperature deep well furnacemultifunctional, with functions such as Forging heating, heat treatment, Forging heating, Casting heating and heat treatment，Stable and reliable,energy-efficient,Easy to maintain,energy saving and environmental protection,Strong adaptability，is a High temperature deep well furnace，it is widely used inpetroleum,Machinery manufacturing,shipping,metallurgy,machinery and other industries，It has a wide range of uses, and is often used inMetal tempering,Metal forging heating,Metal heat treatment,Metal melting and casting,Energy conservation and environmental protection and so on。

High temperature deep well furnace

6、How much is the High temperature deep well furnace?

The High temperature deep well furnace price is introduced as follows:

1. market demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a High temperature deep well furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

2. Manufacturer's sales model

If there is no middleman to earn the difference, then the High temperature deep well furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

3. Manufacturer's strength

Although there are many manufacturers of products in Jinan, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

4. specifications and models

One-combustion energy saving High temperature deep well furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving Preferential activities will be launched regularly, and the whole set of purchasing High temperature deep well furnace will enjoy greater discounts

5. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the High temperature deep well furnace price and service can meet the actual needs of customers.

High temperature deep well furnace

High temperature deep well furnacethe product looks atmospheric.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，It has a wide range of uses, including Energy conservation and environmental protection, Metal heat treatment, Metal tempering, Improve production efficiency and Metal forging heating。