Introduction to Denitrification of flue gas from circular furnace in steel plant and SCR denitration structure principle

Denitrification of flue gas from circular furnace in steel plantis an efficient, stable and environment-friendly flue gas denitrification technology.，is a kind of Denitrification of flue gas from circular furnace in steel plant manufactured by One-combustion energy saving。

1、Brief introduction of Denitrification of flue gas from circular furnace in steel plant

Denitrification of flue gas from circular furnace in steel plantthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，at work,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，It has the functions of environmental protection, Promote sustainable development, Meet the requirements of environmental protection, Promote sustainable development and Meet the requirements of environmental protection，The structure is novel, special, advanced, reasonable and scientific.，generally, it is composed of Temperature control and monitoring system, Catalyst reactor, Flue gas mixing and distribution system, control system, Catalyst supply system and other major components，Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification of flue gas from circular furnace in steel plant can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas from circular furnace in steel plant technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas from circular furnace in steel plant technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of flue gas from circular furnace in steel plant has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of flue gas from circular furnace in steel plant technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of flue gas from circular furnace in steel plant technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from circular furnace in steel plant technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.。

Denitrification of flue gas from circular furnace in steel plant

2、Denitrification of flue gas from circular furnace in steel plant function

Denitrification of flue gas from circular furnace in steel plantit has the functions of Improve energy efficiency, Improve working conditions, Promote sustainable development, Improve working conditions and environmental protection，in the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，the main features are Good selectivity, Less secondary pollution, Stable operation, Environmental protection and pollution-free and energy saving and environmental protection，support customization。

Denitrification of flue gas from circular furnace in steel plant

3、Denitrification of flue gas from circular furnace in steel plant explanation video

You can buy Denitrification of flue gas from circular furnace in steel plant according to your needs and show you Denitrification of flue gas from circular furnace in steel plant videos.。

Denitrification of flue gas from circular furnace in steel plant

As you can see from the live video.，One-combustion energy saving it has the structure of Catalyst reactor, Flue gas mixing and distribution system, Catalyst supply system, control system and Temperature control and monitoring system，This productThe structural design is simple, novel and special.。

4、Denitrification of flue gas from circular furnace in steel plant principle

Denitrification of flue gas from circular furnace in steel plantUnder the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，modern technology。

Denitrification of flue gas from circular furnace in steel plant

5、Structural characteristics of Denitrification of flue gas from circular furnace in steel plant

The Denitrification of flue gas from circular furnace in steel plant structure is introduced as follows:

1. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

2. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

3. Reactor

It is the core component of Denitrification of flue gas from circular furnace in steel plant technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

4. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

5. control system

The whole Denitrification of flue gas from circular furnace in steel plant is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

Denitrification of flue gas from circular furnace in steel plant

6、One-combustion energy saving introduced

One-combustion energy saving, as one of the professional and powerful Denitrification of flue gas from circular furnace in steel plant manufacturers in Jinan, produces Denitrification of flue gas from circular furnace in steel plant with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Denitrification of flue gas from circular furnace in steel plantit can be used in building materials, iron and steel plant, iron and steel plant, coal-fired power station, cement plant and other industries，multifunctional, with functions such as Improve energy efficiency, Improve energy efficiency, environmental protection, Improve working conditions and Promote sustainable development。