Introduction to Flue gas denitrification system for forging heating furnace and SCR denitration system structure principle

Flue gas denitrification system for forging heating furnacethat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，widely used in metallurgy, iron and steel plant, Gas power plant, coal-fired power station, building materials and other fields，It is a product series that integrates Meet the requirements of environmental protection, Promote sustainable development, Promote sustainable development, Improve product quality and Flue gas denitrification，features include Mature technology, Environmental protection and pollution-free, Environment friendly, Less secondary pollution and High denitration efficiency，the product looks atmospheric.。

1、Brief introduction of Flue gas denitrification system for forging heating furnace

Flue gas denitrification system for forging heating furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，multifunctional, with functions such as environmental protection, Improve working conditions, Promote sustainable development, Improve working conditions and environmental protection，the advantage is Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification system for forging heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification system for forging heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification system for forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification system for forging heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification system for forging heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Flue gas denitrification system for forging heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Flue gas denitrification system for forging heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification system for forging heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.。

Flue gas denitrification system for forging heating furnace

2、Introduction of Flue gas denitrification system for forging heating furnace characteristics

Flue gas denitrification system for forging heating furnace has the following characteristics

1. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

2. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

3. Strong adaptability

Flue gas denitrification system for forging heating furnace technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

4. Small secondary pollution

The by-products produced in the Flue gas denitrification system for forging heating furnace opening process are nitrogen and water vapor, and there is no secondary pollution problem.

5. Mature technology

After years of development and application, Flue gas denitrification system for forging heating furnace technology is very mature and has a wide application prospect.

Flue gas denitrification system for forging heating furnace

3、Flue gas denitrification system for forging heating furnace function

Flue gas denitrification system for forging heating furnaceit has the functions of Improve energy efficiency, Promote sustainable development, Improve energy efficiency, environmental protection and Improve working conditions，the principle is simple.Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Flue gas denitrification system for forging heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Flue gas denitrification system for forging heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification system for forging heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification system for forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification system for forging heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification system for forging heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，Mature and stable technology,energy saving and environmental protection,Promote sustainable development,Stable operation,Efficient denitration，was developed and designed by One-combustion energy saving。

Flue gas denitrification system for forging heating furnace

4、Flue gas denitrification system for forging heating furnace picture

The Flue gas denitrification system for forging heating furnace has been upgraded, and the beauty of details is appreciated.。

Flue gas denitrification system for forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Flue gas denitrification system for forging heating furnace structure composition

The Flue gas denitrification system for forging heating furnace has the following structure

1. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

2. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

3. control system

The whole Flue gas denitrification system for forging heating furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

4. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

5. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

Flue gas denitrification system for forging heating furnace

6、How much is the Flue gas denitrification system for forging heating furnace?

The Flue gas denitrification system for forging heating furnace price is introduced as follows:

1. Overall configuration

Usually, the quotation of Flue gas denitrification system for forging heating furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

4. Manufacturer scale

There are many Flue gas denitrification system for forging heating furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Flue gas denitrification system for forging heating furnace have more or less differences in price.

Flue gas denitrification system for forging heating furnace

Flue gas denitrification system for forging heating furnaceCatalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，it is widely used iniron and steel plant,metallurgy,cement plant,Gas power plant,coal-fired power station and other industries。