What is a Step furnace flue gas denitrification? Introduction to the advantages and characteristics of the SCR denitration

Step furnace flue gas denitrificationis an efficient, stable and environment-friendly flue gas denitrification technology.，it has the characteristics of Less secondary pollution, Mature and stable technology, Environmental protection and pollution-free, Mature technology and Mature and stable technology，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Step furnace flue gas denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Step furnace flue gas denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Step furnace flue gas denitrification technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Step furnace flue gas denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Step furnace flue gas denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.。The following is to introduce the Step furnace flue gas denitrification:

1、Brief introduction of Step furnace flue gas denitrification

Step furnace flue gas denitrificationdelective catalytic reduction technology is an efficient flue gas denitrification technology.，It has the functions of Flue gas denitrification, environmental protection, Meet the requirements of environmental protection, environmental protection and Meet the requirements of environmental protection，be loved by our customers.。

Step furnace flue gas denitrification

2、Structural advantages of Step furnace flue gas denitrification

The Step furnace flue gas denitrification has the following structure

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. control system

The whole Step furnace flue gas denitrification is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

3. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

4. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

5. Reactor

It is the core component of Step furnace flue gas denitrification technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

Step furnace flue gas denitrification

3、Advantages of Step furnace flue gas denitrification principle

Step furnace flue gas denitrificationCatalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Step furnace flue gas denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Step furnace flue gas denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Step furnace flue gas denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Step furnace flue gas denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Step furnace flue gas denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Step furnace flue gas denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Step furnace flue gas denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.，widely used iniron and steel plant,metallurgy,cement plant,coal-fired power station,Gas power plant and other industries，super quality and competitive price。

Step furnace flue gas denitrification

4、Step furnace flue gas denitrification use

Step furnace flue gas denitrificationIt has the functions of Promote sustainable development, Improve product quality, Flue gas denitrification, environmental protection and Meet the requirements of environmental protection，is a common Step furnace flue gas denitrification。

Step furnace flue gas denitrification

5、Introduction of Step furnace flue gas denitrification characteristics

Step furnace flue gas denitrification has the following characteristics

1. Small secondary pollution

The by-products produced in the Step furnace flue gas denitrification opening process are nitrogen and water vapor, and there is no secondary pollution problem.

2. Mature technology

After years of development and application, Step furnace flue gas denitrification technology is very mature and has a wide application prospect.

3. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

4. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

5. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

Step furnace flue gas denitrification

6、Step furnace flue gas denitrification price

The Step furnace flue gas denitrification price is introduced as follows:

1. Less intermediate links

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

2. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

3. market quotation

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Step furnace flue gas denitrification will fluctuate greatly, and the market changes are various.

4. Overall configuration

Usually, the quotation of Step furnace flue gas denitrification changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Step furnace flue gas denitrification have more or less differences in price.

Step furnace flue gas denitrification

Step furnace flue gas denitrificationdelective catalytic reduction technology is an efficient flue gas denitrification technology.，it has the characteristics of Less secondary pollution, Economically feasible, Environment friendly, Stable operation and Good selectivity，it is widely used in building materials, cement plant, coal-fired power station, Gas power plant and building materials。