Introduction to Gas-fired regenerative walking furnace, introduction to heating furnace advantages and characteristics

Gas-fired regenerative walking furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，multifunctional, with functions such as hardening and tempering, temper, quench, hardening and tempering and temper，is a Gas-fired regenerative walking furnace，It has the functions of Metal tempering, Energy conservation and environmental protection, Metal forging heating, Improve production efficiency and Metal heat treatment。The following is to introduce the Gas-fired regenerative walking furnace:

1、Brief introduction of Gas-fired regenerative walking furnace

Gas-fired regenerative walking furnaceIt is a forging heating device using gas as fuel.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the product looks atmospheric.。

Gas-fired regenerative walking furnace

2、Physical picture of Gas-fired regenerative walking furnace

High-definition map of Gas-fired regenerative walking furnace is displayed, and the high-definition map of factory area is taken by One-combustion energy saving for reference of our customers.。

Gas-fired regenerative walking furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural advantages of Gas-fired regenerative walking furnace

The Gas-fired regenerative walking furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Gas-fired regenerative walking furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Gas-fired regenerative walking furnace

4、Gas-fired regenerative walking furnace principle

Gas-fired regenerative walking furnacethe principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is a product series that integrates Metal melting and casting, Metal heat treatment, Metal heat treatment, Energy conservation and environmental protection and Improve production efficiency，low in price，reliable quality。

Gas-fired regenerative walking furnace

5、Structural characteristics of Gas-fired regenerative walking furnace

The Gas-fired regenerative walking furnace has the following structure

1. Radiation chamber

The heat load of the main place for Gas-fired regenerative walking furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Gas-fired regenerative walking furnace

6、Gas-fired regenerative walking furnace price

The Gas-fired regenerative walking furnace price is introduced as follows:

1. Low cost of raw materials

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Gas-fired regenerative walking furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Gas-fired regenerative walking furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Gas-fired regenerative walking furnace price can meet the purchasing needs of customers.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Gas-fired regenerative walking furnace have more or less differences in price.

4. company strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Gas-fired regenerative walking furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Gas-fired regenerative walking furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

5. sales mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

Gas-fired regenerative walking furnace

Gas-fired regenerative walking furnaceMainly used forMetal melting and casting,Metal tempering,Improve production efficiency,Metal forging heating andEnergy conservation and environmental protection，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。