What is a High temperature and low dust SCR flue gas denitrification system? Introduction to the advantages and characteristics of the SCR denitration

High temperature and low dust SCR flue gas denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.。

1、Brief introduction of High temperature and low dust SCR flue gas denitrification system

High temperature and low dust SCR flue gas denitrification systemthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the High temperature and low dust SCR flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the High temperature and low dust SCR flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the High temperature and low dust SCR flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the High temperature and low dust SCR flue gas denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the High temperature and low dust SCR flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，features include Promote sustainable development, High denitration efficiency, Stable operation, Less secondary pollution and energy saving and environmental protection，generally, it is composed of Flue gas mixing and distribution system, control system, Temperature control and monitoring system, Catalyst reactor, Catalyst supply system and other major components，the product looks atmospheric.。

High temperature and low dust SCR flue gas denitrification system

2、High temperature and low dust SCR flue gas denitrification system characteristics

The High temperature and low dust SCR flue gas denitrification system features are as follows:

1. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

2. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

3. Mature technology

After years of development and application, High temperature and low dust SCR flue gas denitrification system technology is very mature and has a wide application prospect.

4. High denitration efficiency

The denitration efficiency of High temperature and low dust SCR flue gas denitrification system technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

5. Small secondary pollution

The by-products produced in the High temperature and low dust SCR flue gas denitrification system opening process are nitrogen and water vapor, and there is no secondary pollution problem.

High temperature and low dust SCR flue gas denitrification system

3、High temperature and low dust SCR flue gas denitrification system application

High temperature and low dust SCR flue gas denitrification systemIt is a product series that integrates Flue gas denitrification, Meet the requirements of environmental protection, Improve product quality, environmental protection and Flue gas denitrification，customizable。

High temperature and low dust SCR flue gas denitrification system

4、High temperature and low dust SCR flue gas denitrification system display

High temperature and low dust SCR flue gas denitrification system picture at a glance, showing elegance.。

High temperature and low dust SCR flue gas denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、High temperature and low dust SCR flue gas denitrification system principle

High temperature and low dust SCR flue gas denitrification systemat work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，structure mainly includes: Flue gas mixing and distribution system, Temperature control and monitoring system, Catalyst reactor, Catalyst supply system, control system and so on，productThe overall structural design is simple, diverse and beautiful.，the product looks beautiful.，be of high quality，The price is relatively low.。

High temperature and low dust SCR flue gas denitrification system

6、Brief introduction of High temperature and low dust SCR flue gas denitrification system

High temperature and low dust SCR flue gas denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，It can be used for Promote sustainable development, environmental protection, Improve product quality, Meet the requirements of environmental protection, environmental protection, Flue gas denitrification and so on，the principle is simple.Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，it is widely used in iron and steel plant, metallurgy, coal-fired power station, Gas power plant, cement plant and other industries，it is an ideal choice for customers to buy High temperature and low dust SCR flue gas denitrification system。

High temperature and low dust SCR flue gas denitrification system

High temperature and low dust SCR flue gas denitrification systemusually used in building materials, metallurgy, Gas power plant, coal-fired power station, building materials and other fields，the product looks atmospheric.。