Introduction to Low temperature absorption SCR flue gas denitrification equipment, introduction to SCR denitration system advantages and characteristics

Low temperature absorption SCR flue gas denitrification equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，is a popular Low temperature absorption SCR flue gas denitrification equipment，be loved by our customers.。

1、Brief introduction of Low temperature absorption SCR flue gas denitrification equipment

Low temperature absorption SCR flue gas denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，it can be used in cement plant, coal-fired power station, Gas power plant, building materials, coal-fired power station and other industries，Mainly used forFlue gas denitrification,environmental protection,Promote sustainable development,Flue gas denitrification andMeet the requirements of environmental protection，has been favored by more and more customers.。

Low temperature absorption SCR flue gas denitrification equipment

2、Introduction of advantages of Low temperature absorption SCR flue gas denitrification equipment

Low temperature absorption SCR flue gas denitrification equipments have the following advantages.

1. Mature and stable technology

Low temperature absorption SCR flue gas denitrification equipment technology has been developed and applied for many years, and the technology is mature and stable. The Low temperature absorption SCR flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature absorption SCR flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

2. Intelligent control and convenience of operation

The Low temperature absorption SCR flue gas denitrification equipment has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Low temperature absorption SCR flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

3. Environmental friendliness

The by-products produced by Low temperature absorption SCR flue gas denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature absorption SCR flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

4. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature absorption SCR flue gas denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature absorption SCR flue gas denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

5. Wide applicability

Low temperature absorption SCR flue gas denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature absorption SCR flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

Low temperature absorption SCR flue gas denitrification equipment

3、Low temperature absorption SCR flue gas denitrification equipment structure composition

The Low temperature absorption SCR flue gas denitrification equipment structure is introduced as follows:

1. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

2. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

3. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

4. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

5. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

Low temperature absorption SCR flue gas denitrification equipment

4、Low temperature absorption SCR flue gas denitrification equipment performance advantage

The advantages of Low temperature absorption SCR flue gas denitrification equipment are as follows:

1. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature absorption SCR flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature absorption SCR flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

2. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature absorption SCR flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

3. Mature and stable technology

Low temperature absorption SCR flue gas denitrification equipment technology has been developed and applied for many years, and the technology is mature and stable. The Low temperature absorption SCR flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature absorption SCR flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

4. Environmental friendliness

The by-products produced by Low temperature absorption SCR flue gas denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature absorption SCR flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

5. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature absorption SCR flue gas denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature absorption SCR flue gas denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

Low temperature absorption SCR flue gas denitrification equipment

5、Low temperature absorption SCR flue gas denitrification equipment use

Low temperature absorption SCR flue gas denitrification equipmentWidely used inImprove product quality,Improve product quality,Promote sustainable development,Meet the requirements of environmental protection,environmental protection and so on，the advantage is The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature absorption SCR flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature absorption SCR flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature absorption SCR flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature absorption SCR flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature absorption SCR flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature absorption SCR flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.，it has the functions of Promote sustainable development, Improve energy efficiency, Improve working conditions, Promote sustainable development and environmental protection，it is an ideal choice for customers to buy Low temperature absorption SCR flue gas denitrification equipment。

Low temperature absorption SCR flue gas denitrification equipment

6、Low temperature absorption SCR flue gas denitrification equipment quotation

The Low temperature absorption SCR flue gas denitrification equipment price is introduced as follows:

1. market supply and demand

If there is a large demand for Low temperature absorption SCR flue gas denitrification equipment in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Low temperature absorption SCR flue gas denitrification equipment have more or less differences in price.

3. company strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

4. Reasonable cost

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

5. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Low temperature absorption SCR flue gas denitrification equipment

Low temperature absorption SCR flue gas denitrification equipmentCatalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，it refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.。