What is a SCR catalytic denitrification system? Introduction to the principle of SCR denitration system structure

SCR catalytic denitrification systemthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR catalytic denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR catalytic denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR catalytic denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The SCR catalytic denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR catalytic denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR catalytic denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR catalytic denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，The overall structural design is relatively simple，it is mainly composed of Catalyst reactor, Catalyst supply system, Flue gas mixing and distribution system, Temperature control and monitoring system and control system，is a kind of SCR catalytic denitrification system manufactured by One-combustion energy saving。

1、Brief introduction of SCR catalytic denitrification system

SCR catalytic denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.，it can be used in metallurgy, cement plant, coal-fired power station, iron and steel plant, Gas power plant and other industries，It has the functions of Improve product quality, environmental protection, Meet the requirements of environmental protection, Flue gas denitrification and environmental protection，multifunctional, with functions such as environmental protection, Promote sustainable development, Improve energy efficiency, Improve working conditions and environmental protection，support customization。

SCR catalytic denitrification system

2、SCR catalytic denitrification system structure composition

The SCR catalytic denitrification system has the following structure

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. control system

The whole SCR catalytic denitrification system is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

3. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

4. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

SCR catalytic denitrification system

3、Video analysis of SCR catalytic denitrification system

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site SCR catalytic denitrification systemt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

SCR catalytic denitrification system

As you can see from the live video.，One-combustion energy saving is a SCR catalytic denitrification system。

4、Introduction of SCR catalytic denitrification system characteristics

SCR catalytic denitrification system has the following characteristics

1. Small secondary pollution

The by-products produced in the SCR catalytic denitrification system opening process are nitrogen and water vapor, and there is no secondary pollution problem.

2. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

3. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

4. Environmental protection

The final products of SCR catalytic denitrification system technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

5. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

SCR catalytic denitrification system

5、SCR catalytic denitrification system application

SCR catalytic denitrification systemIt has a wide range of uses, and is often used inImprove product quality,Meet the requirements of environmental protection,Promote sustainable development,Meet the requirements of environmental protection,environmental protection and so on，The structural design is simple, novel and special.，generally, it is composed of Catalyst supply system, Catalyst reactor, Flue gas mixing and distribution system, Temperature control and monitoring system, control system and other major components，super quality and competitive price。

SCR catalytic denitrification system

SCR catalytic denitrification systemthe product looks atmospheric.，it is usually composed of Catalyst reactor, Catalyst supply system, Temperature control and monitoring system, Flue gas mixing and distribution system and control system。