Introduction to Quenching well type annealing furnace, how much is the price of the Forging furnace?

Quenching well type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a Quenching well type annealing furnace。The following is to introduce the Quenching well type annealing furnace:

1、Brief introduction of Quenching well type annealing furnace

Quenching well type annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is mainly composed of convection chamber, combustor, furnace chamber, Radiation chamber and recovery of waste heat，Mainly used forImprove production efficiency,Energy conservation and environmental protection,Metal melting and casting,Improve production efficiency andMetal forging heating。

Quenching well type annealing furnace

2、Quenching well type annealing furnace characteristics

The Quenching well type annealing furnace features are as follows:

1. Strong adaptability

The Quenching well type annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Quenching well type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Quenching well type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Quenching well type annealing furnace

3、Quenching well type annealing furnace application

Quenching well type annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Quenching well type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Quenching well type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Quenching well type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Quenching well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Quenching well type annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Quenching well type annealing furnace

4、Advantages of Quenching well type annealing furnace principle

Quenching well type annealing furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it has the structure of Radiation chamber, ventilation system, convection chamber, furnace chamber and ventilation system，This Quenching well type annealing furnaceThe structure is novel, special, advanced, reasonable and scientific.，support customization。

Quenching well type annealing furnace

5、Quenching well type annealing furnace HD picture

Quenching well type annealing furnace HD real shot, a variety of specifications and models display, for our customers to choose at will.。

Quenching well type annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving's strength

The company has many years of Quenching well type annealing furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Quenching well type annealing furnaceit can be used in pharmacy, aerospace, aerospace, light industry, shipping and other industries，is a common Quenching well type annealing furnace，It has the functions of Metal tempering, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment and Improve production efficiency。