What is a Well type hot-dip galvanizing furnace? heating furnace specifications, models, and parameters

Well type hot-dip galvanizing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The price is relatively low.。The following is to introduce the Well type hot-dip galvanizing furnace:

1、Brief introduction of Well type hot-dip galvanizing furnace

Well type hot-dip galvanizing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a popular Well type hot-dip galvanizing furnace。

Well type hot-dip galvanizing furnace

2、Advantages of Well type hot-dip galvanizing furnace principle

Well type hot-dip galvanizing furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the product looks atmospheric.，has been favored by more and more customers.。

Well type hot-dip galvanizing furnace

3、Well type hot-dip galvanizing furnace application

The purpose of Well type hot-dip galvanizing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Well type hot-dip galvanizing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Well type hot-dip galvanizing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type hot-dip galvanizing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Well type hot-dip galvanizing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Well type hot-dip galvanizing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Well type hot-dip galvanizing furnace

4、Well type hot-dip galvanizing furnace advantage

The advantages of Well type hot-dip galvanizing furnace are as follows:

1. Efficient combustion

The Well type hot-dip galvanizing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Wide application range

The Well type hot-dip galvanizing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Multiple fuel options

Although the Well type hot-dip galvanizing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Intelligent control

The Well type hot-dip galvanizing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Rapid temperature rise

The Well type hot-dip galvanizing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Well type hot-dip galvanizing furnace

5、Well type hot-dip galvanizing furnace video detail

Speak directly with facts on the spot。

Well type hot-dip galvanizing furnace

As you can see from the live video.，One-combustion energy saving is a common Well type hot-dip galvanizing furnace。

6、How much is the Well type hot-dip galvanizing furnace?

The Well type hot-dip galvanizing furnace price is introduced as follows:

1. market quotation

In order to build their own brands, some manufacturers deliberately reduce the price of Well type hot-dip galvanizing furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

2. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

3. geographical position

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Well type hot-dip galvanizing furnace.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Model size

Specifications and models have a great influence on the price of Well type hot-dip galvanizing furnace, so different specifications and models have different selling prices. Customers can reasonably select product specifications and models according to their own needs, so that products can meet their own required standards in terms of specifications and prices.

Well type hot-dip galvanizing furnace

Well type hot-dip galvanizing furnacethe main structure includes combustor, ventilation system, convection chamber, ventilation system, Radiation chamber and so on，This Well type hot-dip galvanizing furnaceThe overall structural design is relatively simple and compact.，the product looks beautiful.。