Introduction to Natural gas regenerative roller bottom heating furnace and heating furnace working principle

Natural gas regenerative roller bottom heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Natural gas regenerative roller bottom heating furnace

Natural gas regenerative roller bottom heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Natural gas regenerative roller bottom heating furnace

2、Introduction of Natural gas regenerative roller bottom heating furnace characteristics

Natural gas regenerative roller bottom heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Natural gas regenerative roller bottom heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Natural gas regenerative roller bottom heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The Natural gas regenerative roller bottom heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Natural gas regenerative roller bottom heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Natural gas regenerative roller bottom heating furnace

3、Natural gas regenerative roller bottom heating furnace HD picture

Overview of high-definition pictures,the product looks beautiful., different specifications and models。

Natural gas regenerative roller bottom heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Advantages of Natural gas regenerative roller bottom heating furnace principle

Natural gas regenerative roller bottom heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a popular Natural gas regenerative roller bottom heating furnace，it has the characteristics of energy-efficient, Easy to control, Easy to maintain, energy saving and environmental protection and Stable and reliable，Widely used inMetal heat treatment,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection,Metal heat treatment and so on，has been favored by more and more customers.。

Natural gas regenerative roller bottom heating furnace

5、Natural gas regenerative roller bottom heating furnace structure

The Natural gas regenerative roller bottom heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Natural gas regenerative roller bottom heating furnace

6、Company preferential activities

Natural gas regenerative roller bottom heating furnace is a new type of heating furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for building materials and other industries. Now consult One-combustion energy savingNatural gas regenerative roller bottom heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Natural gas regenerative roller bottom heating furnacethe main structure includes ventilation system, combustor, recovery of waste heat, ventilation system, Radiation chamber and so on，it is widely used in shipping, electron, metallurgy, surface treatment, pharmacy and other industries。