What is a Roller bottom quenching heating furnace? Introduction to the advantages and characteristics of the Forging furnace

Roller bottom quenching heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Roller bottom quenching heating furnace

Roller bottom quenching heating furnaceIt is a forging heating device using gas as fuel.，is a Roller bottom quenching heating furnace，widely used inHousehold necessities,war industry,shipping,pharmacy,metallurgy and other industries，it mainly includes convection chamber, recovery of waste heat, ventilation system, furnace chamber and Radiation chamber，Roller bottom quenching heating furnaceThe overall structural design is relatively simple，it has the functions of quench, anneal, normalizing, Casting heating and normalizing。

Roller bottom quenching heating furnace

2、Roller bottom quenching heating furnace performance advantage

The advantages of Roller bottom quenching heating furnace are as follows:

1. Extend the service life of equipment

The Roller bottom quenching heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Multiple fuel options

Although the Roller bottom quenching heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Rapid temperature rise

The Roller bottom quenching heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. easy to operate

The operation interface of the Roller bottom quenching heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Roller bottom quenching heating furnace

3、Roller bottom quenching heating furnace function

Roller bottom quenching heating furnacemultifunctional, with functions such as heat treatment, temper, Forging heating, hardening and tempering and anneal，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，has been favored by more and more customers.。

Roller bottom quenching heating furnace

4、Roller bottom quenching heating furnace characteristics

The Roller bottom quenching heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Roller bottom quenching heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Roller bottom quenching heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Roller bottom quenching heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Roller bottom quenching heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Roller bottom quenching heating furnace

5、Roller bottom quenching heating furnace use

The purpose of Roller bottom quenching heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Roller bottom quenching heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Roller bottom quenching heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Roller bottom quenching heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Roller bottom quenching heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Roller bottom quenching heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Roller bottom quenching heating furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving has many years of experience in Roller bottom quenching heating furnace production, and is a professional Roller bottom quenching heating furnace manufacturer. With favorable Roller bottom quenching heating furnace price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Roller bottom quenching heating furnace manufacturer in Jinan, Shandong province.。

One-combustion energy saving

Roller bottom quenching heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。