What is a Regenerative burner chain grate furnace? Introduction to the advantages and characteristics of the heating furnace

Regenerative burner chain grate furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Simple structure and advanced technology.，the main structure includes furnace chamber, recovery of waste heat, ventilation system, ventilation system and ventilation system。

1、Brief introduction of Regenerative burner chain grate furnace

Regenerative burner chain grate furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，modern technology。

Regenerative burner chain grate furnace

2、Regenerative burner chain grate furnace use

The purpose of Regenerative burner chain grate furnace is introduced as follows:

1. Metal forging heating

The Regenerative burner chain grate furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Regenerative burner chain grate furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Regenerative burner chain grate furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner chain grate furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Regenerative burner chain grate furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Regenerative burner chain grate furnace

3、Working principle of Regenerative burner chain grate furnace

Regenerative burner chain grate furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it can be used in machinery, pharmacy, material, metallurgy, pharmacy and other industries，it is mainly composed of combustor, recovery of waste heat, Radiation chamber, convection chamber and furnace chamber，Regenerative burner chain grate furnaceThe overall structural design is simple, diverse and beautiful.，Widely used inMetal forging heating,Metal heat treatment,Energy conservation and environmental protection,Metal tempering,Metal melting and casting and so on，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Regenerative burner chain grate furnace

4、Regenerative burner chain grate furnace field real shot

Speak directly with facts on the spot。

Regenerative burner chain grate furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

5、Structural characteristics of Regenerative burner chain grate furnace

The Regenerative burner chain grate furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative burner chain grate furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Regenerative burner chain grate furnace

Regenerative burner chain grate furnacethe product looks beautiful.，It has a wide range of uses, including Improve production efficiency, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and Metal melting and casting。