Introduction to Medium high temperature natural gas trolley furnace, heating furnace specifications, model parameters

Medium high temperature natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Medium high temperature natural gas trolley furnace，It has a wide range of uses, and is often used inMetal forging heating,Metal melting and casting,Metal tempering,Metal melting and casting,Metal heat treatment and so on，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it is an ideal choice for customers to buy Medium high temperature natural gas trolley furnace。The following is to introduce the Medium high temperature natural gas trolley furnace:

1、Brief introduction of Medium high temperature natural gas trolley furnace

Medium high temperature natural gas trolley furnaceIt is a forging heating device using gas as fuel.，can be customized according to user's needs.。

Medium high temperature natural gas trolley furnace

2、Medium high temperature natural gas trolley furnace characteristics

The Medium high temperature natural gas trolley furnace features are as follows:

1. Efficient heating

The Medium high temperature natural gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Strong adaptability

The Medium high temperature natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Medium high temperature natural gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Medium high temperature natural gas trolley furnace

3、Working principle of Medium high temperature natural gas trolley furnace

Medium high temperature natural gas trolley furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，It is a product series that integrates Metal heat treatment, Metal tempering, Metal forging heating, Improve production efficiency and Metal forging heating，the product looks atmospheric.，is a common Medium high temperature natural gas trolley furnace。

Medium high temperature natural gas trolley furnace

4、Medium high temperature natural gas trolley furnace use

The purpose of Medium high temperature natural gas trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Medium high temperature natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Medium high temperature natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Medium high temperature natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Medium high temperature natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Medium high temperature natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Medium high temperature natural gas trolley furnace

5、Structural advantages of Medium high temperature natural gas trolley furnace

The Medium high temperature natural gas trolley furnace has the following structure

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Medium high temperature natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Medium high temperature natural gas trolley furnace

6、Medium high temperature natural gas trolley furnace principle

Medium high temperature natural gas trolley furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，widely used inelectron,building materials,aerospace,war industry,machinery and other industries，the main features are energy-efficient, energy saving and environmental protection, Easy to control, Strong adaptability and energy-efficient，super quality and competitive price。

Medium high temperature natural gas trolley furnace

Medium high temperature natural gas trolley furnaceCommonly used inMetal forging heating,Improve production efficiency,Energy conservation and environmental protection,Metal melting and casting,Energy conservation and environmental protection and so on，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is widely used in Machinery manufacturing, Household necessities, automobile, metallurgy, chemical industry and other industries。