What is a Anchor chain automatic heating furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Anchor chain automatic heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a Anchor chain automatic heating furnace，Cheap and high quality。The following is to introduce the Anchor chain automatic heating furnace:

1、Brief introduction of Anchor chain automatic heating furnace

Anchor chain automatic heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Anchor chain automatic heating furnace

2、Anchor chain automatic heating furnace characteristics

The Anchor chain automatic heating furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Anchor chain automatic heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Efficient heating

The Anchor chain automatic heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Strong adaptability

The Anchor chain automatic heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Anchor chain automatic heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Stable and reliable

The Anchor chain automatic heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Anchor chain automatic heating furnace

3、Anchor chain automatic heating furnace real beat

Various styles and styles of Anchor chain automatic heating furnace, complete models, for you to choose at will.。

Anchor chain automatic heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Anchor chain automatic heating furnace use

The purpose of Anchor chain automatic heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Anchor chain automatic heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Anchor chain automatic heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Anchor chain automatic heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Anchor chain automatic heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Anchor chain automatic heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Anchor chain automatic heating furnace

5、Anchor chain automatic heating furnace structure

The Anchor chain automatic heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Anchor chain automatic heating furnace

6、company strength

The company has many years of Anchor chain automatic heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Anchor chain automatic heating furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，features include energy-efficient, energy saving and environmental protection, Strong adaptability, Easy to control and Stable and reliable，it can be used in pharmacy, Household necessities, shipping, heat treatment, light industry and other industries。