What is a Walking beam hybrid heating furnace? How much is the price of the forging furnace?

Walking beam hybrid heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the main features are energy saving and environmental protection, Strong adaptability, Stable and reliable, Easy to control and Easy to maintain，it can be used in light industry, machinery, war industry, building materials, material and other industries，was developed and designed by One-combustion energy saving。The following is to introduce the Walking beam hybrid heating furnace:

1、Brief introduction of Walking beam hybrid heating furnace

Walking beam hybrid heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Walking beam hybrid heating furnace，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Walking beam hybrid heating furnace

2、Walking beam hybrid heating furnace function

Walking beam hybrid heating furnaceit has the functions of hardening and tempering, heat treatment, temper, anneal and normalizing，features include Easy to maintain, energy-efficient, Strong adaptability, energy saving and environmental protection and Easy to control，the product looks atmospheric.，low in price，be of high quality。

Walking beam hybrid heating furnace

3、Walking beam hybrid heating furnace characteristics

The Walking beam hybrid heating furnace features are as follows:

1. Strong adaptability

The Walking beam hybrid heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Efficient heating

The Walking beam hybrid heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Walking beam hybrid heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Walking beam hybrid heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Walking beam hybrid heating furnace

4、Walking beam hybrid heating furnace advantage

The advantages of Walking beam hybrid heating furnace are as follows:

1. Improve product quality

Because the Walking beam hybrid heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Wide application range

The Walking beam hybrid heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Rapid temperature rise

The Walking beam hybrid heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Multiple fuel options

Although the Walking beam hybrid heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Uniform heating

The Walking beam hybrid heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Walking beam hybrid heating furnace

5、Walking beam hybrid heating furnace principle

Walking beam hybrid heating furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，Structure consists of ventilation system, combustor, convection chamber, ventilation system, furnace chamber and so on，productThe structural design is simple, novel and special.，It has a wide range of uses, including Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Improve production efficiency and Metal melting and casting，multifunctional, with functions such as Forging heating, heat treatment, anneal, normalizing and quench。

Walking beam hybrid heating furnace

6、Walking beam hybrid heating furnace price

The Walking beam hybrid heating furnace price is introduced as follows:

1. Self quality

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Walking beam hybrid heating furnace is low.

2. product costs

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

3. Manufacturer scale

Our factory is a direct selling manufacturer of Walking beam hybrid heating furnace, with independent production and processing facilities, few circulation links and low circulation cost.

4. Configuration level

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Walking beam hybrid heating furnace has a higher cost performance.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Walking beam hybrid heating furnace price and service can meet the actual needs of customers.

Walking beam hybrid heating furnace

Walking beam hybrid heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，generally, it is composed of combustor, furnace chamber, ventilation system, recovery of waste heat, convection chamber and other major components，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of ventilation system, furnace chamber, Radiation chamber, recovery of waste heat and ventilation system。