Introduction to Anchor chain annealing furnace and forging furnace working principle

Anchor chain annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in light industry, shipping, pharmacy, metallurgy and war industry，is a kind of high quality and low price Anchor chain annealing furnace。

1、Brief introduction of Anchor chain annealing furnace

Anchor chain annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as heat treatment, temper, anneal, Forging heating and Casting heating，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，It has a wide range of uses, including Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting and Metal heat treatment，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Anchor chain annealing furnace

2、Anchor chain annealing furnace use

The purpose of Anchor chain annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Anchor chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal tempering

By properly heating and cooling the metal material, the Anchor chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Anchor chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Anchor chain annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Anchor chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Anchor chain annealing furnace

3、Anchor chain annealing furnace principle

Anchor chain annealing furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main features are Stable and reliable, Strong adaptability, energy-efficient, energy saving and environmental protection and Stable and reliable，It is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.，it is an ideal choice for customers to buy Anchor chain annealing furnace。

Anchor chain annealing furnace

4、Anchor chain annealing furnace characteristics

The Anchor chain annealing furnace features are as follows:

1. Strong adaptability

The Anchor chain annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Strong adaptability

The Anchor chain annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Anchor chain annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Anchor chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Anchor chain annealing furnace

5、Anchor chain annealing furnace price concessions

The Anchor chain annealing furnace price is introduced as follows:

1. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Anchor chain annealing furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Anchor chain annealing furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

2. product quality

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

3. raw material

The quality of material selection is one of the main factors that directly affect the Anchor chain annealing furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. Brand strength

At present, there are various brands of Anchor chain annealing furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Anchor chain annealing furnace are different.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Anchor chain annealing furnace

6、One-combustion energy saving's strength

The company has many years of Anchor chain annealing furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Anchor chain annealing furnaceis a popular Anchor chain annealing furnace，The structural design is simple, novel and special.，Structure consists of recovery of waste heat, combustor, convection chamber, recovery of waste heat, furnace chamber and so on。