Introduction to Chain track stainless steel annealing furnace and Forging furnace working principle

Chain track stainless steel annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，usually used in automobile, metallurgy, surface treatment, shipping, machinery and other fields，is an advanced Chain track stainless steel annealing furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Chain track stainless steel annealing furnace

Chain track stainless steel annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Chain track stainless steel annealing furnace

2、Chain track stainless steel annealing furnace use

The purpose of Chain track stainless steel annealing furnace is introduced as follows:

1. Improve production efficiency

The Chain track stainless steel annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Chain track stainless steel annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Chain track stainless steel annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Chain track stainless steel annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Chain track stainless steel annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Chain track stainless steel annealing furnace

3、Chain track stainless steel annealing furnace structure composition

The Chain track stainless steel annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Chain track stainless steel annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Chain track stainless steel annealing furnace

4、Chain track stainless steel annealing furnace performance advantage

Chain track stainless steel annealing furnaces have the following advantages.

1. Uniform heating

The Chain track stainless steel annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Efficient combustion

The Chain track stainless steel annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Intelligent control

The Chain track stainless steel annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. easy to operate

The operation interface of the Chain track stainless steel annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Extend the service life of equipment

The Chain track stainless steel annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Chain track stainless steel annealing furnace

5、Chain track stainless steel annealing furnace price concessions

The Chain track stainless steel annealing furnace price is introduced as follows:

1. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Chain track stainless steel annealing furnace price and service can meet the actual needs of customers.

3. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. cost of production

The cost of manufacturing Chain track stainless steel annealing furnace varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

5. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Chain track stainless steel annealing furnace has a higher cost performance.

Chain track stainless steel annealing furnace

6、company profile

One-combustion energy saving is a professional manufacturer of Forging furnace, which produces Chain track stainless steel annealing furnace with the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Chain track stainless steel annealing furnaceit has the functions of Casting heating, quench, normalizing, heat treatment and Casting heating，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。