Introduction to Chain track roasting furnace, forging furnace specifications, model parameters

Chain track roasting furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used in pharmacy, shipping, building materials, aerospace, Household necessities and other fields，it has the structure of convection chamber, combustor, ventilation system, combustor and convection chamber，This productThe overall structural design is simple, diverse and beautiful.，it is an ideal choice for customers to buy Chain track roasting furnace。The following is to introduce the Chain track roasting furnace:

1、Brief introduction of Chain track roasting furnace

Chain track roasting furnaceIt is a forging heating device using gas as fuel.，It has a wide range of uses, and is often used inMetal forging heating,Metal heat treatment,Energy conservation and environmental protection,Metal tempering,Metal melting and casting and so on，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a common Chain track roasting furnace。

Chain track roasting furnace

2、Structural advantages of Chain track roasting furnace

The Chain track roasting furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Chain track roasting furnace

3、Chain track roasting furnace application

Chain track roasting furnaces have the following purposes.

1. Energy conservation and environmental protection

The Chain track roasting furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Chain track roasting furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Chain track roasting furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain track roasting furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Chain track roasting furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Chain track roasting furnace

4、On-site real shot of Chain track roasting furnace

High-definition map of Chain track roasting furnace is displayed, and the high-definition map of factory area is taken by One-combustion energy saving for reference of our customers.。

Chain track roasting furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Advantages of Chain track roasting furnace principle

Chain track roasting furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a kind of high quality and low price Chain track roasting furnace，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is mainly composed of ventilation system, furnace chamber, recovery of waste heat, ventilation system and Radiation chamber，energy saving and environmental protection,Easy to control,Strong adaptability,energy-efficient,Easy to maintain。

Chain track roasting furnace

6、Chain track roasting furnace quotation

The Chain track roasting furnace price is introduced as follows:

1. Sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

2. manufacturing cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Chain track roasting furnace.

3. Manufacturer's strength

Although there are many manufacturers of products in Jinan, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

Chain track roasting furnace

Chain track roasting furnacethe main features are energy saving and environmental protection, Strong adaptability, Stable and reliable, Easy to control and Stable and reliable，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is widely used inchemical industry,light industry,Machinery manufacturing,pharmacy,petroleum and other industries。