Introduction to Chain belt quenching furnace, introduction to Forging furnace advantages and characteristics

Chain belt quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

1、Brief introduction of Chain belt quenching furnace

Chain belt quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，customizable。

Chain belt quenching furnace

2、Chain belt quenching furnace advantage

Chain belt quenching furnaces have the following advantages.

1. Improve product quality

Because the Chain belt quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Efficient combustion

The Chain belt quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. easy to operate

The operation interface of the Chain belt quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Intelligent control

The Chain belt quenching furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Chain belt quenching furnace can significantly reduce energy consumption, thus reducing operating costs.

Chain belt quenching furnace

3、Chain belt quenching furnace principle

Chain belt quenching furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of heat treatment, hardening and tempering, quench, Casting heating and normalizing，is a Chain belt quenching furnace，is developed and improved by One-combustion energy saving。

Chain belt quenching furnace

4、Functional advantages of Chain belt quenching furnace

Chain belt quenching furnaces have the following advantages.

1. Rapid temperature rise

The Chain belt quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Uniform heating

The Chain belt quenching furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Extend the service life of equipment

The Chain belt quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Multiple fuel options

Although the Chain belt quenching furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Wide application range

The Chain belt quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Chain belt quenching furnace

5、Structural advantages of Chain belt quenching furnace

The Chain belt quenching furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Chain belt quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Chain belt quenching furnace

6、Chain belt quenching furnace introduction video

Speak directly with facts on the spot。

Chain belt quenching furnace

As you can see from the live video.，One-combustion energy saving It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Chain belt quenching furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，usually used in shipping, light industry, pharmacy, Machinery manufacturing, material and other fields。