What is a Steel chain heating furnace? Introduction to the principle of Forging furnace structure

Steel chain heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it is an ideal choice for customers to buy Steel chain heating furnace。

1、Brief introduction of Steel chain heating furnace

Steel chain heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used in chemical industry, Household necessities, metallurgy, building materials, war industry and other fields。

Steel chain heating furnace

2、Introduction of advantages of Steel chain heating furnace

Steel chain heating furnaces have the following advantages.

1. easy to operate

The operation interface of the Steel chain heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Extend the service life of equipment

The Steel chain heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Steel chain heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Uniform heating

The Steel chain heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. easy to operate

The operation interface of the Steel chain heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Steel chain heating furnace

3、Introduction of Steel chain heating furnace characteristics

Steel chain heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Efficient heating

The Steel chain heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Steel chain heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Steel chain heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Steel chain heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Steel chain heating furnace

4、Structural advantages of Steel chain heating furnace

The Steel chain heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Steel chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Steel chain heating furnace

5、Advantages of Steel chain heating furnace principle

Steel chain heating furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it can be used in surface treatment, electron, machinery, light industry, aerospace and other industries，features include Strong adaptability, Easy to maintain, Easy to control, Stable and reliable and energy saving and environmental protection。

Steel chain heating furnace

6、Real-time shooting in One-combustion energy saving's production workshop

The finished products of the Steel chain heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Steel chain heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Steel chain heating furnacethe advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，it has the characteristics of energy-efficient, Easy to control, Stable and reliable, energy saving and environmental protection and energy-efficient，multifunctional, with functions such as hardening and tempering, Casting heating, anneal, Forging heating and heat treatment。