What is a Automatic temperature control box furnace? Introduction to the principle of heating furnace structure

Automatic temperature control box furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Mainly used forMetal tempering,Improve production efficiency,Metal melting and casting,Metal forging heating andEnergy conservation and environmental protection，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，reliable quality。

1、Brief introduction of Automatic temperature control box furnace

Automatic temperature control box furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，was developed and designed by One-combustion energy saving。

Automatic temperature control box furnace

2、Automatic temperature control box furnace advantage

The advantages of Automatic temperature control box furnace are as follows:

1. Intelligent control

The Automatic temperature control box furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Rapid temperature rise

The Automatic temperature control box furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Multiple fuel options

Although the Automatic temperature control box furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Efficient combustion

The Automatic temperature control box furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Automatic temperature control box furnace

3、Structural advantages of Automatic temperature control box furnace

The Automatic temperature control box furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Automatic temperature control box furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic temperature control box furnace

4、Automatic temperature control box furnace performance advantage

The advantages of Automatic temperature control box furnace are as follows:

1. Uniform heating

The Automatic temperature control box furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. easy to operate

The operation interface of the Automatic temperature control box furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Extend the service life of equipment

The Automatic temperature control box furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Improve product quality

Because the Automatic temperature control box furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Uniform heating

The Automatic temperature control box furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Automatic temperature control box furnace

5、Automatic temperature control box furnace function

Automatic temperature control box furnaceit has the functions of hardening and tempering, normalizing, anneal, heat treatment and temper，It can be used for Metal melting and casting, Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting and so on，has been favored by more and more customers.。

Automatic temperature control box furnace

6、Automatic temperature control box furnace quotation

The Automatic temperature control box furnace price is introduced as follows:

1. Proper management mode

One-combustion energy saving Automatic temperature control box furnace manufacturer is a self-produced and self-selling manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Automatic temperature control box furnace price is also low.

2. Parameter size

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

3. product quality

The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.

4. regional advantages

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Automatic temperature control box furnace.

5. market supply and demand

In order to build their own brands, some manufacturers deliberately reduce the price of Automatic temperature control box furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

Automatic temperature control box furnace

Automatic temperature control box furnacethe main structure includes ventilation system, recovery of waste heat, convection chamber, Radiation chamber, ventilation system and so on，Automatic temperature control box furnaceThe overall structural design is relatively simple，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。