Introduction to Automatic temperature control walking heat treatment furnace, how much is the price of the forging furnace?

Automatic temperature control walking heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，usually used in pharmacy, chemical industry, heat treatment, war industry, aerospace and other fields，the product looks atmospheric.。

1、Brief introduction of Automatic temperature control walking heat treatment furnace

Automatic temperature control walking heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，multifunctional, with functions such as hardening and tempering, Casting heating, normalizing, heat treatment and Casting heating，is a popular Automatic temperature control walking heat treatment furnace，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，has been favored by more and more customers.。

Automatic temperature control walking heat treatment furnace

2、Structural advantages of Automatic temperature control walking heat treatment furnace

The Automatic temperature control walking heat treatment furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Automatic temperature control walking heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Automatic temperature control walking heat treatment furnace

3、Automatic temperature control walking heat treatment furnace HD real shot

The following is the live video of Automatic temperature control walking heat treatment furnace designed and produced by One-combustion energy saving for users, from which we can see the Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs. of One-combustion energy savingproduction-manufacturing的Automatic temperature control walking heat treatment furnace.。

Automatic temperature control walking heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The overall structural design is simple and novel.，the main structure includes furnace chamber, Radiation chamber, convection chamber, combustor, ventilation system and so on。

4、Functional advantages of Automatic temperature control walking heat treatment furnace

Automatic temperature control walking heat treatment furnaces have the following advantages.

1. Multiple fuel options

Although the Automatic temperature control walking heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic temperature control walking heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Improve product quality

Because the Automatic temperature control walking heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Uniform heating

The Automatic temperature control walking heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Automatic temperature control walking heat treatment furnace

5、Introduction of Automatic temperature control walking heat treatment furnace characteristics

Automatic temperature control walking heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Automatic temperature control walking heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Automatic temperature control walking heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to control

The combustion system and ventilation system of the Automatic temperature control walking heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Automatic temperature control walking heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Automatic temperature control walking heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Automatic temperature control walking heat treatment furnace

6、How much is the Automatic temperature control walking heat treatment furnace?

The Automatic temperature control walking heat treatment furnace price is introduced as follows:

1. market quotation

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Automatic temperature control walking heat treatment furnace will be very high.

2. product configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

3. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. product model

The prices of products with different specifications and models will definitely be different. Generally speaking, the larger the specifications and models, the higher the prices will be. Because the raw materials and time consumed in the manufacturing process of large-sized products are more, the prices are much higher than those of small-sized products.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Automatic temperature control walking heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Automatic temperature control walking heat treatment furnace price can meet the purchasing needs of customers.

Automatic temperature control walking heat treatment furnace

Automatic temperature control walking heat treatment furnacethe product looks beautiful.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。