Introduction to Circular gas trolley furnace, heating furnace advantages, characteristics and principles

Circular gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a common Circular gas trolley furnace，super quality and competitive price。

1、Brief introduction of Circular gas trolley furnace

Circular gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is widely used in aerospace, electron, Household necessities, pharmacy and war industry，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，be loved by our customers.。

Circular gas trolley furnace

2、Introduction of advantages of Circular gas trolley furnace

Circular gas trolley furnaces have the following advantages.

1. Extend the service life of equipment

The Circular gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Multiple fuel options

Although the Circular gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Improve product quality

Because the Circular gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Multiple fuel options

Although the Circular gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Improve product quality

Because the Circular gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Circular gas trolley furnace

3、Structural advantages of Circular gas trolley furnace

The Circular gas trolley furnace has the following structure

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Circular gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Circular gas trolley furnace

4、Circular gas trolley furnace display

High-definition map of Circular gas trolley furnace is displayed, and the high-definition map of factory area is taken by One-combustion energy saving for reference of our customers.。

Circular gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Circular gas trolley furnace principle

Circular gas trolley furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.，it has been widely used in material, surface treatment, automobile, metallurgy, Machinery manufacturing and other industries，it has the characteristics of energy saving and environmental protection, Strong adaptability, energy-efficient, Easy to maintain and Easy to control，is developed and improved by One-combustion energy saving。

Circular gas trolley furnace

6、Circular gas trolley furnace price consultation

The Circular gas trolley furnace price is introduced as follows:

1. Configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Circular gas trolley furnace price is affected by the configuration, and the price varies.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Circular gas trolley furnace have more or less differences in price.

3. Parameter size

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

4. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Circular gas trolley furnace

Circular gas trolley furnaceit is widely used in heat treatment, machinery, Household necessities, shipping, chemical industry and other industries，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。