What is a Stepping bottom square billet heating furnace? Introduction to the Working Principle of forging furnace

Stepping bottom square billet heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Stepping bottom square billet heating furnace，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。The following is to introduce the Stepping bottom square billet heating furnace:

1、Brief introduction of Stepping bottom square billet heating furnace

Stepping bottom square billet heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.。

Stepping bottom square billet heating furnace

2、Introduction of Stepping bottom square billet heating furnace characteristics

Stepping bottom square billet heating furnace has the following characteristics

1. Stable and reliable

The Stepping bottom square billet heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the Stepping bottom square billet heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Stepping bottom square billet heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Stepping bottom square billet heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Stepping bottom square billet heating furnace

3、Introduction of advantages of Stepping bottom square billet heating furnace

The advantages of Stepping bottom square billet heating furnace are as follows:

1. Uniform heating

The Stepping bottom square billet heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Wide application range

The Stepping bottom square billet heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Intelligent control

The Stepping bottom square billet heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stepping bottom square billet heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Stepping bottom square billet heating furnace

4、Stepping bottom square billet heating furnace principle

Stepping bottom square billet heating furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，it has the characteristics of energy-efficient, Easy to maintain, Stable and reliable, Strong adaptability and energy-efficient。

Stepping bottom square billet heating furnace

5、Stepping bottom square billet heating furnace HD real shot

Various specifications and models of Stepping bottom square billet heating furnace are displayed for our customers to visit.。

Stepping bottom square billet heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Stepping bottom square billet heating furnace price

The Stepping bottom square billet heating furnace price is introduced as follows:

1. Low cost of raw materials

A Stepping bottom square billet heating furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

2. regional difference

The price of Stepping bottom square billet heating furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a large Stepping bottom square billet heating furnace manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Stepping bottom square billet heating furnace price positioning more reasonable, low-cost and economical.

3. market competition

Generally, when the supply of Stepping bottom square billet heating furnace exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

4. product model

Because of the different specifications of products, its price will be different, so its selling price is closely related to the model specifications, but the overall selling price of One-combustion energy saving is reasonable among similar products.

5. quality factor

The quality of the Stepping bottom square billet heating furnace is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the Stepping bottom square billet heating furnace price.

Stepping bottom square billet heating furnace

Stepping bottom square billet heating furnaceis a popular Stepping bottom square billet heating furnace，the product looks atmospheric.，The structure is novel, special, advanced, reasonable and scientific.，it is usually composed of furnace chamber, convection chamber, Radiation chamber, ventilation system and ventilation system。