Introduction to Automatic continuous quenching heat treatment furnace, introduction to Forging furnace function advantages and characteristics

Automatic continuous quenching heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。The following is to introduce the Automatic continuous quenching heat treatment furnace:

1、Brief introduction of Automatic continuous quenching heat treatment furnace

Automatic continuous quenching heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Automatic continuous quenching heat treatment furnace，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as anneal, temper, Casting heating, hardening and tempering and Forging heating，is developed and improved by One-combustion energy saving。

Automatic continuous quenching heat treatment furnace

2、Introduction of advantages of Automatic continuous quenching heat treatment furnace

The advantages of Automatic continuous quenching heat treatment furnace are as follows:

1. Rapid temperature rise

The Automatic continuous quenching heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. easy to operate

The operation interface of the Automatic continuous quenching heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Multiple fuel options

Although the Automatic continuous quenching heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Wide application range

The Automatic continuous quenching heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Automatic continuous quenching heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Automatic continuous quenching heat treatment furnace

3、Automatic continuous quenching heat treatment furnace video

You can buy Automatic continuous quenching heat treatment furnace according to your needs and show you Automatic continuous quenching heat treatment furnace videos.。

Automatic continuous quenching heat treatment furnace

As you can see from the live video.，One-combustion energy saving at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

4、Automatic continuous quenching heat treatment furnace use

The purpose of Automatic continuous quenching heat treatment furnace is introduced as follows:

1. Metal forging heating

The Automatic continuous quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Automatic continuous quenching heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Automatic continuous quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Automatic continuous quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Automatic continuous quenching heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Automatic continuous quenching heat treatment furnace

5、Automatic continuous quenching heat treatment furnace structure composition

The Automatic continuous quenching heat treatment furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Automatic continuous quenching heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. Radiation chamber

The heat load of the main place for Automatic continuous quenching heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Automatic continuous quenching heat treatment furnace

Automatic continuous quenching heat treatment furnacethe main structure includes ventilation system, Radiation chamber, recovery of waste heat, ventilation system, combustor and so on，features include Easy to maintain, Strong adaptability, Stable and reliable, energy saving and environmental protection and energy-efficient。