Introduction to Walking beam industrial furnace, heating furnace specifications, model parameters

Walking beam industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Walking beam industrial furnace。The following is to introduce the Walking beam industrial furnace:

1、Brief introduction of Walking beam industrial furnace

Walking beam industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it can be used in building materials, pharmacy, heat treatment, chemical industry, machinery and other industries，widely used in light industry, automobile, petroleum, war industry, metallurgy and other fields，is carefully developed by One-combustion energy saving combined with advanced technology。

Walking beam industrial furnace

2、Walking beam industrial furnace principle

Walking beam industrial furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Walking beam industrial furnace

3、Walking beam industrial furnace characteristics

The Walking beam industrial furnace features are as follows:

1. Efficient heating

The Walking beam industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Walking beam industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Walking beam industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to control

The combustion system and ventilation system of the Walking beam industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Walking beam industrial furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Walking beam industrial furnace

4、Walking beam industrial furnace real beat

High-definition pictures of Walking beam industrial furnace of different specifications and models,the product looks beautiful., reliable in quality and trustworthy.。

Walking beam industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Walking beam industrial furnace use

The purpose of Walking beam industrial furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Walking beam industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Walking beam industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Walking beam industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Walking beam industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Walking beam industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Walking beam industrial furnace

Walking beam industrial furnaceit has the functions of quench, heat treatment, Forging heating, Casting heating and hardening and tempering，features include Strong adaptability, Easy to control, Stable and reliable, Strong adaptability and Easy to maintain，it has the functions of normalizing, anneal, normalizing, hardening and tempering and anneal。