What is a Titanium alloy heat treatment trolley furnace? How much is the price of the Forging furnace?

Titanium alloy heat treatment trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，it has the characteristics of Easy to maintain, energy saving and environmental protection, Strong adaptability, Stable and reliable and energy saving and environmental protection，is a common Titanium alloy heat treatment trolley furnace。The following is to introduce the Titanium alloy heat treatment trolley furnace:

1、Brief introduction of Titanium alloy heat treatment trolley furnace

Titanium alloy heat treatment trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of Casting heating, anneal, temper, Forging heating and normalizing，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Titanium alloy heat treatment trolley furnace

2、Titanium alloy heat treatment trolley furnace HD real picture

HD pictures of Titanium alloy heat treatment trolley furnace of different specifications and models。

Titanium alloy heat treatment trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Titanium alloy heat treatment trolley furnace function

Titanium alloy heat treatment trolley furnacemultifunctional, with functions such as heat treatment, hardening and tempering, quench, Casting heating and hardening and tempering，it is mainly composed of ventilation system, ventilation system, convection chamber, furnace chamber and ventilation system，This productThe overall structural design is simple and novel.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.。

Titanium alloy heat treatment trolley furnace

4、Introduction of advantages of Titanium alloy heat treatment trolley furnace

The advantages of Titanium alloy heat treatment trolley furnace are as follows:

1. Efficient combustion

The Titanium alloy heat treatment trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. easy to operate

The operation interface of the Titanium alloy heat treatment trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Wide application range

The Titanium alloy heat treatment trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Multiple fuel options

Although the Titanium alloy heat treatment trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Extend the service life of equipment

The Titanium alloy heat treatment trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Titanium alloy heat treatment trolley furnace

5、Titanium alloy heat treatment trolley furnace structure composition

The Titanium alloy heat treatment trolley furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Radiation chamber

The heat load of the main place for Titanium alloy heat treatment trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Titanium alloy heat treatment trolley furnace

6、Titanium alloy heat treatment trolley furnace quotation

The Titanium alloy heat treatment trolley furnace price is introduced as follows:

1. product quality

The Titanium alloy heat treatment trolley furnace is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Titanium alloy heat treatment trolley furnace and won the trust of customers.

2. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Titanium alloy heat treatment trolley furnace price and service can meet the actual needs of customers.

3. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. deploy

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

Titanium alloy heat treatment trolley furnace

Titanium alloy heat treatment trolley furnaceit has the functions of heat treatment, temper, normalizing, anneal and quench，It is a forging heating device using gas as fuel.，is a Titanium alloy heat treatment trolley furnace。