Introduction to Double door annealing gas trolley furnace and forging furnace structure principle

Double door annealing gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Double door annealing gas trolley furnace

Double door annealing gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the characteristics of Easy to maintain, Strong adaptability, Easy to maintain, Easy to control and Stable and reliable，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，support customization。

Double door annealing gas trolley furnace

2、Advantages of Double door annealing gas trolley furnace principle

Double door annealing gas trolley furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Double door annealing gas trolley furnace。

Double door annealing gas trolley furnace

3、Double door annealing gas trolley furnace advantage

The advantages of Double door annealing gas trolley furnace are as follows:

1. Multiple fuel options

Although the Double door annealing gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Double door annealing gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Rapid temperature rise

The Double door annealing gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Improve product quality

Because the Double door annealing gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Double door annealing gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

Double door annealing gas trolley furnace

4、Double door annealing gas trolley furnace application

Double door annealing gas trolley furnaces have the following purposes.

1. Improve production efficiency

The Double door annealing gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Double door annealing gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Double door annealing gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Double door annealing gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Double door annealing gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Double door annealing gas trolley furnace

5、Double door annealing gas trolley furnace work site real shot

The panoramic shooting of One-combustion energy saving Double door annealing gas trolley furnace is shown as follows.。

Double door annealing gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Double door annealing gas trolley furnace price concessions

The Double door annealing gas trolley furnace price is introduced as follows:

1. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Double door annealing gas trolley furnace price and service can meet the actual needs of customers.

2. raw material

The quality of material selection is one of the main factors that directly affect the Double door annealing gas trolley furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. Cost input

When the Double door annealing gas trolley furnace is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. region

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

5. Self quality

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

Double door annealing gas trolley furnace

Double door annealing gas trolley furnacemultifunctional, with functions such as normalizing, heat treatment, temper, hardening and tempering and quench，It is a forging heating device using gas as fuel.。